Preparing the SRX210 Services Gateway
for Installation
This chapter includes the following topics:
• Preparing the SRX210 Services Gateway for Rack-Mount, Desk-Mount, and Wall-Mount Installation on page 49
• Preparing the SRX210 Services Gateway for Rack-Mount Installation on page 49
• Preparing the SRX210 Services Gateway for Desk-Mount Installation on page 51
• Preparing the SRX210 Services Gateway for Wall-Mount Installation on page 52
Preparing the SRX210 Services Gateway for Rack-Mount, Desk-Mount, and Wall-Mount
Installation
You can mount an SRX210 Services Gateway in a rack, on a desk, or on a wall. See the following topics for more information:
• Preparing the SRX210 Services Gateway for Rack-Mount Installation on page 49
• Preparing the SRX210 Services Gateway for Desk-Mount Installation on page 51
• Preparing the SRX210 Services Gateway for Wall-Mount Installation on page 52 The mounting kits for rack, wall, and desk installation of the SRX210 Services Gateway must be ordered separately. Contact your Juniper Networks customer service
representative for more information. Related
Documentation
Unpacking the SRX210 Services Gateway on page 45
•
• Clearance Requirements for Airflow and Hardware Maintenance of the SRX210 Services Gateway on page 37
Preparing the SRX210 Services Gateway for Rack-Mount Installation
You can mount an SRX210 Services Gateway on four-post (telco) racks, enclosed cabinets, and open-frame racks.
NOTE: The SRX210 Services Gateway cannot be center-mounted in racks.
Table 21 on page 50provides the list of tasks you need to perform before installing the device.
Table 21: SRX210 Services Gateway Preinstallation Checklist for
Rack-Mount Installation
Additional Information Task
“Site Preparation Checklist for the SRX210 Services Gateway” on page 33
Verify that the site meets the requirements.
“SRX210 Services Gateway Rack Requirements” on page 36
Verify that the racks or cabinets meet the specific requirements.
“Clearance Requirements for Airflow and Hardware Maintenance of the SRX210 Services Gateway” on page 37
Place the rack or cabinet in its permanent location, allowing adequate clearance for airflow and maintenance, and secure it to the building structure.
“Unpacking the SRX210 Services Gateway” on page 45
Remove the services gateway chassis from the shipping carton.
Verify that you have the following parts available in your rack-mounting kit for the SRX210 Services Gateway:
• Rack-mounting brackets
• Mounting screws
• Power supply adapter tray with screws
• Adapter stopper bracket
“Adjusting the Power Supply Adapter Tray for the SRX210 Services Gateway for Rack-Mount Installation” on page 54
Adjust the power supply adapter tray.
NOTE: The rack-mounting kit is not shipped with the device and must be ordered separately.
Related Documentation
Clearance Requirements for Airflow and Hardware Maintenance of the SRX210 Services Gateway on page 37
•
• Unpacking the SRX210 Services Gateway on page 45
• Preparing the SRX210 Services Gateway for Rack-Mount, Desk-Mount, and Wall-Mount Installation on page 49
• Preparing the SRX210 Services Gateway for Desk-Mount Installation on page 51
• Preparing the SRX210 Services Gateway for Wall-Mount Installation on page 52
Copyright © 2014, Juniper Networks, Inc. 50
Preparing the SRX210 Services Gateway for Desk-Mount Installation
You can mount an SRX210 Services Gateway on a desk or other level surface horizontally or vertically. The four rubber feet attached to the chassis provide stability.
Table 22 on page 51provides the list of tasks you need to perform before installing the device.
Table 22: SRX210 Services Gateway Preinstallation Checklist for
Desk-Mount Installation
Additional Information Task
“Site Preparation Checklist for the SRX210 Services Gateway” on page 33
Verify that the site meets the requirements.
“Clearance Requirements for Airflow and Hardware Maintenance of the SRX210 Services Gateway” on page 37
Place the desk in its permanent location, allowing adequate clearance for airflow and maintenance, and secure it to the building structure.
“Unpacking the SRX210 Services Gateway” on page 45
Remove the services gateway chassis from the shipping carton.
Verify that you have the following parts available in your desk-mounting kit to mount the SRX210 Services Gateway vertically:
• Vertical stand
• Screws
NOTE: If you are mounting the services gateway horizontally on a desk, verify that the rubber feet are attached to the chassis.
NOTE: The vertical desk-mounting kit is not shipped with the device and must be ordered separately.
Related Documentation
Clearance Requirements for Airflow and Hardware Maintenance of the SRX210 Services Gateway on page 37
•
• Unpacking the SRX210 Services Gateway on page 45
• Preparing the SRX210 Services Gateway for Rack-Mount Installation on page 49
• Preparing the SRX210 Services Gateway for Wall-Mount Installation on page 52 Chapter 10: Preparing the SRX210 Services Gateway for Installation
Preparing the SRX210 Services Gateway for Wall-Mount Installation
You can mount an SRX210 Services Gateway on a wall. The four rubber feet attached to the chassis provide stability.
Table 23 on page 52provides the list of tasks you need to perform before installing the device.
Table 23: SRX210 Services Gateway Preinstallation Checklist for
Wall-Mount Installation
Additional Information Task
“Site Preparation Checklist for the SRX210 Services Gateway” on page 33
Verify that the site meets the requirements.
“Unpacking the SRX210 Services Gateway” on page 45
Remove the services gateway chassis from the shipping carton.
Verify that you have the following parts available in your wall-mounting kit to mount the SRX210 Services Gateway on wall:
• Wall-mounting brackets
• Screws
NOTE: The wall-mounting kit is not shipped with the device and must be ordered separately.
Related Documentation
• Unpacking the SRX210 Services Gateway on page 45
• Preparing the SRX210 Services Gateway for Rack-Mount Installation on page 49
• Preparing the SRX210 Services Gateway for Desk-Mount Installation on page 51
Copyright © 2014, Juniper Networks, Inc. 52