Anema, S., Lowe, E. K. and Li, Y. (2003). "Effect of pH on the viscosity of heated reconstituted skim milk." International Dairy Journal 14(6): 541-48. Bansal, B. and Chen, X. D. (2006). "A critical review of milk fouling in heat
exchangers." Comprehensive Reviews in Food Science and Food Safety 5(2): 27-33.
Belmar-Beiny, M. T. and Fryer, P. J. (1993). "Preliminary stages of fouling from whey-protein solutions." Journal of Dairy Research 60(4): 467-83.
Billet, R. (1989). "Evaporation Technology - Principles, Applications, Economics." VCH Verlagsgescllschaft mbH, Weinheim, Germany.
Bouman, S., Waalewijn, R., De Jong, P. and Van Der Linden, H. J. L. J. (1993). "Design of falling-film evaporators in the dairy industry." Journal of the Society of Dairy Technology 46(3): 100-06.
Britten, M., Green, M. L., Boulet, M. and Paquin, P. (1988). "Deposit formation on heated surfaces - effect of interface energetics." Journal of Dairy Research 55(4): 551-62.
Burton, H. (1965). "A method for studying factors in milk which influence deposition of milk solids on heated surface." Journal of Dairy Research 32(1): 65-&. Burton, H. (1968). "Reviews of the progress of dairy science: Section G. Deposit from
the whole milk heat treatment plant - a review and discussion." Journal of Dairy Research 35: 317-30.
Chen, H. (1997). Heat Transfer and Fouling in Film Evaporators with Rotating Surfaces. Department of Food Technology. Palmerston North, Massey University. PhD.
Chen, H. and Jebson, R. S. (1997). "Factors Affecting Heat Transfer in Falling Film Evaporators." Food and Bioproducts Processing 75: 111-16.
Chen, P. (2002). "An apparatus designed for falling film boiling behaviour investigation " Fonterra Research Centre, Palmerston North
Daufin, G., Labbe, J. P., Quemerais, A., Brule, G., Michel, F., Roignant, M. and Priol, M. (1987). "Fouling of a heat-exchange surface by whey, milk and model fluids - an analytical study." Lait 67(3): 339-64.
de Jong, P. (1997). "Impact and control of fouling in milk processing." Trends in Food Science & Technology 8(12): 401-05.
Delsing, B. M. A. and Hiddink, J. (1983). "Fouling of heat transfer surfaces by dairy liquids." Netherlands Milk and Dairy Journal 37(3): 139-48.
Duker, B. (2010). Personal Communication. Fonterra Research Centre, Palmerston North.
Foster, C. L., Britten, M. and Green, M. L. (1989). "A model heat exchange apparatus for the investigation of fouling of stainless steel surfaces by milk. 1. Deposit
formation at 100 oC." Journal of Dairy Research 56(2): 201-09.
Fryer, P. J., Christian, G. K. and Liu, W. (2006). "How hygiene happens: physics and chemistry of cleaning." International Journal of Dairy Technology 59(2): 76- 84.
Fung, L., McCarthy, O. and Tuoc, T. (1998). "The effect of fat globule membrane damage on fouling of whole milk." Fouling and cleaning in food
processing'98. Cambridge, U.K.
Galani, D. and Apenten, R. K. O. (1999). "Heat-Induced Denaturation and
Aggregation of ß-Lactoglobulin: Kinetics of Formation of Hydrophobic and Disulphide-Linked Aggregates." International Journal of Food Science and Technology 34: 467-76.
Hadfield, J. (2007). "Mitigating Fouling with Transient Coating." Fonterra Co- operaitve Group Ltd.
Housova, J. (1970). "Heat transfer in falling-film evaporators." Prumysl Potravin 21(1 Suppl).
Incropera, F. P. and DeWitt, D. P. (1990). "Fundamentals of Heat and Mass Transfer." John Wiley & Sons, New York 3rd edn.
Jeurnink, T., Verheul, M., Stuart, M. C. and deKruif, C. G. (1996a). "Deposition of heated whey proteins on a chromium oxide surface." Colloids and Surfaces B- Biointerfaces 6(4-5): 291-307.
Jeurnink, T. J. M. and Brinkman, D. W. (1994). "The cleaning of heat exchangers and evaporators after processing milk or whey." International Dairy Journal 4(4): 347-68.
Jeurnink, T. J. M. and Dekruif, K. G. (1995). "Calcium-concentration in milk relation to heat stability and fouling." Netherlands Milk and Dairy Journal 49(2-3): 151-65.
Jeurnink, T. J. M., Walstra, P. and deKruif, C. G. (1996). "Mechanisms of fouling in dairy processing." Netherlands Milk and Dairy Journal 50(3): 407-26.
Kang, C. and Lee, Y. (2007). "The surface modification of stainless steel and the correlation between the surface properties and protein adsorption." Journal of Material Science(18): 1389-98.
Karlsson, C. A.-C. (1999). Fouling and Cleaning of Solid Surfaces: The Influence of Surface Characteristics and Operating Conditions. Food Engineering, Lund University. PhD.
Kastanas, P., Ravanis, S., Lewis, M. J. and Grandison, A. S. (1995). "Effects of raw- milk quality on fouling at UHT conditions." Journal of the Society of Dairy Technology 48(3): 97-99.
Krisdhasima, V., McGuire, J. and Sproull, R. (1992). "Surface hydrophobic
influences on beta-lactoglobulin adsorption kinetics." Journal of Colloid and Interface Science 154(2): 337-50.
Mackereth, A. R. (1995). "Thermal and Hydraulic Aspects of Falling Film
Evaporation." The University of Canterbury, Christchurch, New Zealand PhD. Mackereth, A. R. and Grant, J. E. (1998). "Comparative Evaporator Fouling Losses
for Whole Milk and Skim Milk." New Zealand Dairy Research Institute. Masse, (2007). "The Market for Whey Products", Fonterra Co-operative Group,
Palmerston North, New Zealand.
Müller-Steinhagen, H. and Branch, C. A. (1997a). "Heat transfer and heat transfer fouling in Kraft Black Liquor Evaporators." Experimental Thermal and Fluid Science(14): 425-37.
Müller-Steinhagen, H. and Branch, C. A. (1997b). Heat Transfer and Heat Transfer Fouling in Kraft Black Liquor Evaporators. New York, NY, Etats-Unis, Elsevier.
Norde, W. and Haynes, C. A. (1994). Reversibility and the mechanism of protein adsorption. Symposium on Proteins at Interfaces II - Fundamentals and Applications, at the 207th National Meeting of the American-Chemical- Society, San Diego, Ca.
Parbhu, A., Hendy, S. and Danne, M. (2006). "Reducing Milk Protein Adhesion Rates: A Transient Surface Treatment of Stainless Steel." Food and Bioproducts Processing 84(4): 274-78.
Parbhu, A. N., Soltis, J., Chen, L. Q., Atkin, J. and Hendy, S. (2004). "Specific ion binding influences on surface potential of chromium oxide." Current Applied Physics 4(2-4): 152-55.
Parris, N. and Baginski, M. A. (1991). "A Rapid Method for the Determination of Whey Protein Denaturation." Journal of Dairy Science 74(1): 58-64.
Patil, G. R. and Reuter, H. (1986). "Deposit formation in UHT plants. Ι. Effect of forewarming in indirectly heated plants." Milchwissenschaft-Milk Science International 41(6): 337-39.
Rebmann, H. (2008). "Use of surface coatings to mitigate dairy fouling." Fonterra Co- operative Group Ltd
Rebmann, H. (2007). "Mitigation of Dairy Fouling using Transient Coatings" Fonterra Co-operative Group Ltd.
Rosmaninho, R., Rocha, F., Rizzo, G., Müller-Steinhagen, H. and Melo, L. F. (2007). "Calcium phosphate fouling on TiN-coated stainless steel surfaces: Role of ions and particles." Chemical Engineering Science 62(14): 3821-31. Rosmaninho, R., Santos, O., Nylander, T., Paulsson, M., Beuf, M., Benezech, T.,
Yiantsios, S., Andritsos, N., Karabelas, A., Rizzo, G., Müller-Steinhagen, H. and Melo, L. F. (2007b). "Modified stainless steel surfaces targeted to reduce fouling - Evaluation of fouling by milk components." Journal of Food
Engineering 80(4): 1176-87.
Rosmaninho, R., Visser, H. and Melo, L. (2001). Influence of the surface tension components of stainless steel on fouling caused by calcium phosphate, Coimbra, Portugal.
Santos, O., Nylander, T., Rosmaninho, R., Rizzo, G., Yiantsios, S., Andritsos, N., Karabelas, A., Müller-Steinhagen, H., Melo, L., Boulangé-Petermann, L., Gabet, C., Braem, A., Trägårdh, C. and Paulsson, M. (2004). "Modified stainless steel surfaces targeted to reduce fouling--surface characterization." Journal of Food Engineering 64(1): 63-79.
Santos, O., Nylander, T., Schillén, K., Paulsson, M. and Trägårdh, C. (2006). "Effect of surface and bulk solution properties on the adsorption of whey protein onto steel surfaces at high temperature." Journal of Food Engineering 73(2): 174- 89.
Singh, H. and Creamer, L. K. (1991). "Changes in size and composition of protein aggregates on heating reconstituted concentrated skim milk at 120-degrees-C." Journal of Food Science 56(3): 671-77.
Srichantra, A. (2008). Studies of UHT-plant fouling by fresh, recombined and reconstituted whole milk: Effect of preheat treatments. Institution of Food Nutrition and Human Health. Palmerston North, Massey University. PhD. Tissier, J. P., Galeotti, M. A. and Lalande, M. (1985). "Experimental and analytical
study of milk deposit formation on heated stainless steel surfaces." Fouling and cleaning in food processing. Second International Conference, Madison, Wisconsin, July 14-17, 1985: 178-202.
Visser, J. and Jeurnink, T. J. M. (1997). "Fouling of Heat Exchangers in the Dairy Industry." Experimental Thermal and Fluid Science 14: 407-24.
Wahlgren, M. and Arnebrant, T. (1990). "Adsorption of beta-lactoglobulin onto silica, methylated silica and polysulfone." Journal of Colloid and Interface Science 136(1): 259-65.
Walstra, P. and Jenness, R. (1984). Dairy Chemistry and Physics, Canada: John Wiley & Sons, Inc.
Wood, P A (1982) Physical Properties of Dairy Products. Technical Report T2/82. Hamilton, New Zealand: Ministry of Agriculture and Fisheries
Ye, A., Singh, H., James Oldfield, D. and Anema, S. (2004). "Kinetics of heat-
induced association of ß-lactoglobulin and Į-lactalbumin with milk fat globule
membrane in whole milk." International Dairy Journal 14(5): 389-98. Ye, A., Singh, H., Taylor, M. and Anema, S. (2005). "Disruption of fat globules
during concentration of whole milk in a pilot scale multiple-effect evaporator." International Journal of Dairy Technology 58(3): 143-49.
Yoon, Y. and Lund, D. B. (1994). "Magnetic treatment of milk and surface-treatment of plate heat exchangers effect on milk fouling." Journal of Food Science 59(5): 964-69.
Chapter 9
9 Appendix
9.1 Appendix A
h
fEnthalpy of Milk at specific temperature and total solids (calculated according to