SECCION DE AVISOS
VARIABLE Y/O QUIEN RESULTE LEGÍTIMO RESPONSABLE O PROPIETARIO DE LA FUENTE Y RELACIÓN DE TRABAJO; terceros interesados en el referido procedimiento judicial, en virtud de que se
Features
u Single beam or twin beam
u Flow rate at 3 bar: up to 962 cm3/min u Spray angle 15 to 70°
EV 6 injection valves are designed to inject the fuel as efficiently as possible into the intake manifold runner to achieve a homogeneous distribution of fuel in air flow. EV 6 injection valves feature high corrosion resistance and excellent engine start characteristics. The hydraulic connections of the Bosch injection valves EV 6, EV 12 and EV 14 are compatible.
Application
Fuel Filter Requirements Particle size ≥ 5 μm Max. particle size 35 μm Separation rate ≥ 82 %
Technical Specifications
Mechanical Data
System pressure Max. 8 bar
Weight ≤ 55 g
Fuel input Top-feed injector Operating temperature -40 to 110°C Permissible fuel temperatures ≤ 70°C
Climate-proof corresponding to saline fog test DIN 50 021 Housing design Standard (S), Long (L) Spray type C (Conical Spray) or E (2-Spray) Flow rate at 3 bar (n-heptane) 134 to 962 cm³/min
92 to 658 g/min Spray angle α 15 to 70° Bent angle γ 0 to 20°
Coil resistance 1.2 to 16 Ω Fuel compatibility E85 / M100
(after Methanol-operating, the valves must be flushed with nor- mal gasoline-fuel)
Electrical Data
Power supply 6 to 16.5 V Connectors and Wires
Connectors Jetronic, Sumitomo, Motorsport connectors
Installation Notes
Please ask for more information before ordering.
Injectors with low resistance are only supplied with a peak and hold power stage. Ordering Information EV 6, 116 g/min n-heptane Order number 0 280 156 194 EV 6, 261 g/min n-heptane Order number 0 280 155 868 EV 6, 261 g/min n-heptane Order number 0 280 155 830 EV 6, 269 g/min n-heptane Order number 0 280 156 063 EV 6, 310 g/min n-heptane Order number 0 280 156 012 EV 6, 658 g/min n-heptane Order number B 280 434 499-02 Accessories
Clip for locking bush of plastic
Order number 2 431 314 004
Clip for locking bush of steel
Order number 2 431 314 011
Dimensions
Spray Illustrations
EV6 Standard
EV6 Long
Mounting Instructions
EV 6 Variations
Variations of production type valves
Part Nr. 0 280 156 194 0 280 155 868 0 280 155 830 0 280 156 063 0 280 156 012 Flow rate/min 116 g/170 cm3 261 g/382 cm3 261 g/382 cm3 269 g/393 cm3 310 g/453 cm3 Type C C E E C Housing S L L L S α80 15° 15° 20° 15° 20° γ 0° 0° 0° 10° 5° δ - - 90° 270° 90° Resistance 14.5 Ω 12 Ω 12 Ω 12 Ω 12 Ω
Further variations are available on request
Variation of Motorsport valves
Part Nr. B 280 434 499-02 Flow rate/min 658 g/962 cm3 Type C Housing S α80 25° γ 0° δ - Resistance 12 Ω
Further variations are available on request.
2
Injection Valve EV 12
Features
u Single beam or twin beam
u Flow rate at 3 bar: up to 1,023 cm3/min u Spray angle 5 to 60°
u With extension
EV 12 injection valves are designed to inject the fuel as efficiently as possible into the intake manifold runner to achieve a homogeneous distribution of fuel in air flow. There is only one injector body size for the EV 12. Vari- ous delivery rates and spray-angles are available. The in- jection valves EV 6, EV 12 and EV 14 are compatible.
Technical Specifications
Mechanical Data
System pressure Max. 8 bar
Weight 40 g
Installation length 48 mm (total 81 mm) Fuel input Top-feed injector Operating temperature -40 to 110°C Permissible fuel temperatures ≤ 70°C
Climate-proof corresponding to saline fog test DIN 50 021 Housing design Standard with extension Spray type C (Conical Spray) or E (2-Spray) Flow rate at 3 bar (n-heptane) 146 to 1,023 cm³/min
59 to 670 g/min Spray angle α 5 to 60° Bent angle γ 0 to 17° Coil resistance 11 to 16 Ω Fuel compatibility E85 / M100
(after Methanol-operating, the valves must be flushed with nor- mal gasoline-fuel)
Electrical Data
Power supply 6 to 16.5 V Connectors and Wires
Connectors Jetronic, Sumitomo, Motorsport connectors
Installation Notes
Please ask for more information before ordering.
Ordering Information EV 12, 120 g/min n-heptane Order number 0 280 157 002 EV 12, 193 g/min n-heptane Order number 0 280 157 012 EV 12, 217 g/min n-heptane Order number 0 280 155 897 EV 12, 269 g/min n-heptane Order number 0 280 155 892 EV 12, 310 g/min n-heptane Order number 0 280 157 000 Accessories
Clip for locking bush of plastic
Order number 2 431 314 004
Clip for locking bush of steel
Order number 2 431 314 011
Dimensions
Housing Variations
Spray Illustrations
Mounting Instructions
EV 12 Variations
Variations of production type valves
Part Nr. 0 280 157 002 0 280 157 012 0 280 155 897 0 280 155 892 0 280 157 000 Flow rate/min 120 g/175 cm3 193 g/282 cm3 217 g/317 cm3 269 g/393 cm3 310 g/453 cm3 Type E E E E E Housing S S S S S α 15° 15° 15° 15° 15° γ 10° 10° 10° 10° 10° δ 270° 270° 270° 270° 270° Resistance 12 Ω 12 Ω 12 Ω 12 Ω 12 Ω
Further variations are available on request.
Injection Valve EV 14
Features
u Conical spray or 2-spray
u Flow rate at 3 bar: up to 1,023 cm3/min u Spray angle 15 to 85°
u With or without extension
EV 14 injection valves are the latest revision of the EV 6 injection valve technology. EV 14 xT are the latest revi- sion of the EV 12.
EV 14 is designed for a wide range of flow rates and spray patterns. Compact size and three standard ver- sions simplify mounting in a variety of applications.
Technical Specifications
Mechanical Data
System pressure Max. 8 bar
Weight ≤ 30 g
Installation lengths 33.6, 48.65 or 60.65 mm Fuel input Top-feed injector Operating temperature -40 to 110°C Permissible fuel temperatures ≤ 70°C
Climate-proof corresponding to saline fog test DIN 50 021 Housing design Compact (C), Standard (S),
Long (L)
Spray type C (Conical Spray) or E (2-Spray) Flow rate at 3 bar (n-heptane) 146 to 1,023 cm³/min
100 to 700 g/min Spray angle α 15 to 85° Bent angle γ 0 to 15° Coil resistance 12 Ω Fuel compatibility E85 / M100
Electrical Data
Power supply 6 to 16.5 V Connectors and Wires
Connectors Jetronic, Sumitomo, Motorsport connectors
Installation Notes
Please ask for more information before ordering.
Ordering Information EV 14, 116 g/min n-heptane Order number 0 280 158 110 EV 14, 116 g/min n-heptane Order number 0 280 158 200 EV 14, 150 g/min n-heptane Order number 0 280 158 107 EV 14, 150 g/min n-heptane Order number 0 280 158 013 EV 14, 503 g/min n-heptane Order number B 280 436 038-07 EV 14, 503 g/min n-heptane Order number B 280 436 038-08 EV 14, 387 g/min n-heptane Order number B 280 436 038-09 EV 14, 387 g/min n-heptane Order number B 280 436 038-10 EV 14, 237 g/min n-heptane Order number 0 280 158 038 EV 14, 237 g/min n-heptane Order number 0 280 158 116 EV 14, 429 g/min n-heptane Order number 0 280 158 123 EV 14, 670 g/min n-heptane Order number 0 280 158 040 EV 14, 697 g/min n-heptane Order number B 280 436 469-01 Accessories
Clip for locking bush of plastic
Order number 2 431 314 021
Clip for locking bush of steel
Order number 2 431 314 018
Dimensions
Spray Illustrations
Housing Variations
Mounting Instructions
EV 14 Variations
Variations of production type valves
Part Nr. 0 280 158 110 0 280 158 200 0 280 158 107 0 280 158 013 0 280 158 038 Flow rate/min 116 g/170 cm3 116 g/170 cm3 150 g/219 cm3 150 g/219 cm3 237 g/347 cm3 Type C E C E C Housing L S L S KxT α 15° 15° 20° 19° 20° γ 0° 0° 0° 0° 0° δ 0° 90° 0° 90° 0° Resistance 12 Ω 12 Ω 12 Ω 12 Ω 12 Ω Part Nr. 0 280 158 116 0 280 158 123 0 280 158 040 Flow rate/min 237 g/347 cm3 429 g/627 cm3 670 g/980 cm3 Type E E C Housing L SxT KxT α 22° 25° 30° γ 5° 0° 0° δ 90° 90° 0° Resistance 12 Ω 12 Ω 12 Ω
Further variations are available on request
Variations of Motorsport valves
Part Nr. B 280 436 038-07 B 280 436 038-08 B 280 436 038-09 B 280 436 038-10 B 280 436 469-01 Flow rate/min 503 g/736 cm3 503 g/736 cm3 387 g/566 cm3 387 g/566 cm3 697 g/1,019 cm3 Type C C C C E Housing S S S S S α 70° 25° 70° 25° 20° γ 0° 0° 0° 0° 0° δ - - - - 90° Resistance 12 Ω 12 Ω 12 Ω 12 Ω 12 Ω
Further variations are available on request.
2
Injection Valve EV 14i
Features
u Flow rate at 3 bar: up to 1,023 cm3/min u Spray angle 15 to 85°
u Extremely small housing u Very low weight
u Special development for motorsports
EV 14i injection valves are the smallest Bosch low pres- sure injection valves and especially developed for mo- torsports applications.
The valve is designed for a wide range of flow rates and spray patterns. Very compact size simplifies mounting in a variety of applications.
Technical Specifications
Mechanical Data
System pressure Max. 8 bar
Weight ≤20 g
Installation lengths 26.9 mm Fuel input Top-feed injector Operating temperature -40 to 110°C Permissible fuel temperatures ≤70°C
Climate-proof corresponding to saline fog test DIN 50 021 Housing design Very compact
Spray type C (Conical Spray) or E (2-Spray) Flow rate at 3 bar (n-heptane) Max. 1,023 cm³/min
Max. 700 g/min Spray angle α 15 to 85° Bent angle γ 0 to 15° Coil resistance 12 Ω Fuel compatibility E85 / M100
(after Methanol-operating, the valves must be flushed with nor- mal gasoline-fuel)
Electrical Data
Power supply 6 to 16.5 V Connectors and Wires
Connectors Div. motorsports connectors
Installation Notes
Injection Valves EV 14i are manufactured on order only and are not on stock. The minimum purchase quantity is 25 pieces per variation. Please ask for more information before ordering.
Injectors with low resistance are only supplied with a peak and hold power stage.
Ordering Information
EV 14i, 213 g/min n-heptane
Order number B 280 436 323-03
EV 14i, 263 g/min n-heptane
Order number B 280 436 270-03
EV 14i, 261 g/min n-heptane
Order number B 280 436 548-01
EV 14i, 310 g/min n-heptane
Order number B 280 436 470-01
Accessories Extended tip
Order number on request
Dimensions
Spray Illustrations
EV 14i Variations
Variations of production type valves
Part Nr. B 280 436 323-03 B 280 436 270-03 B 280 436 548-01 B 280 436 470-01 Flow rate/min 213 g/311 cm3 263 g/385 cm3 261 g/382 cm3 310 g/453 cm3 Type C C E C Housing i i ixT i α 85° 25° 20° 50° γ 0° 0° 15° 0° δ 0° 0° 90° 0° Resistance 12 Ω 12 Ω 12 Ω 12 Ω
Further variations are available on request.