- Se obtuvo un hidrogel de ácido acrílico – ácido itacónico con las características físicas adecuadas para impregnar el sustrato.
- El método de impregnación del sustrato con el hidrogel fue el adecuado, esto se confirmó con la prueba de IR-ATR.
- La reducción del AgNO3 con la solución madre previamente preparada de NaBH4
(Metodología 1) no formó la cantidad necesaria de AgNPs para inhibir el crecimiento bacteriano, esto con base en las pruebas de espectroscopia de ICP y antimicrobianas.
- Se lograron formar las AgNPs suficientes para inhibir el crecimiento de las bacterias, S. aureus y E. coli, con la reducción del AgNO3 utilizando la solución recién preparada de NaBH4, (Metodología 2) lo anterior comprobado con las pruebas de espectroscopia de ICP y antimicrobianas.
- Las pruebas antimicrobianas realizadas al grafeno y al óxido de grafeno en solitario demostraron que el grafeno fue superior que el óxido de grafeno para inhibir el crecimiento bacteriano.
- El sistema hidrogel/AgNPs/grafeno con y sin líquido iónico presentó mejor actividad antimicrobiana ante la bacteria S. aureus la cual es Gram positiva.
- El uso del líquido iónico favoreció la incorporación del grafeno en el sistema y por lo tanto incrementó la actividad antimicrobiana en los sustratos que contenían hidrogel, nanopartículas de plata y grafeno.
- El sistema hidrogel/AgNPs/óxido de grafeno con líquido iónico presentó mejor actividad antimicrobiana ante la bacteria S. aureus la cual es Gram positiva.
- En general el sistema que logró funcionar mejor para S. aureus y E. coli fue la venda impregnada con hidrogel, nanopartículas de plata en la concentración tres (3.851 ppm) y grafeno utilizando líquido iónico, identificado como VHAg3-G-CLI
64 Finalmente, se concluye que bajo las metodologías reportadas en el presente trabajo es posible elaborar un sustrato antimicrobiano con hidrogel, nanopartículas de plata y grafeno utilizando líquido iónico, el cual presente buenas propiedades antimicrobianas.
Este sistema en un futuro podría tener un alto impacto en la industria médica, la cual, entre otros objetivos, busca combatir infecciones y evitar su propagación, incluyendo este sistema en ropa quirúrgica, batas, campos estériles, apósitos… etc.
65
TRABAJO FUTURO
- Realizar estudios de citotoxicidad de los sustratos antimicrobianos.
- Realizar evaluaciones en otros tipos de bacterias, virus y hongos.
- Realizar pruebas antimicrobianas in vivo para obtener resultados más precisos.
- Evaluar otro tipo de nanoestructura de carbono y de líquido iónico.
- Utilizar otro tipo de medio para albergar el hidrogel, las nanopartículas de plata y el grafeno u óxido de grafeno.
- Realizar estudios de tiempo de vida media de los sustratos antimicrobianos.
- Estudiar el mecanismo de reacción y el grado de entrecruzamiento del hidrogel.
66
APÉNDICE #1
Bacterias Gram positivas y Gram negativas
En microbiología, las bacterias pueden clasificarse en dos grandes grupos: Gram positivas y Gram negativas, dependiendo de la estructura de su pared celular, esto propicia distintas reacciones a la “Tinción de Gram”.
Las diferencias residen en su pared celular, las bacterias Gram negativas tienen una capa de peptidoglicano delgada la cual está rodeada por una membrana de lípidos y finalmente por una membrana externa, mientras que las bacterias Gram positivas tienen una capa gruesa de peptidoglicano, sin embargo, no cuentan con membrana externa. En la Figura 29 se muestra la estructura de una bacteria Gram positiva y una Gram negativa.
Figura 29. Estructura de bacterias Gram positivas y Gram negativas
67
APÉNDICE #2
Estandarización de halos de inhibición en pruebas antimicrobianas.
Con el objetivo de realizar un análisis comparativo de las pruebas antimicrobianas entre las muestras realizadas para la parte III del proyecto: “Preparación del sustrato con hidrogel/AgNPs/G u GO; con y sin líquido iónico” se realizó la siguiente metodología:
Con el Software “Image J” se midió el área de los halos de inhibición registrados, además del área de cada trozo de venda, posteriormente se hicieron los cálculos respectivos para obtener el porcentaje de cada halo de inhibición comparado con el área de la venda. En la Tabla 16 se presenta un ejemplo los cálculos realizados.
Tabla 16. Estandarización para los datos de las pruebas antimicrobianas Experimento #1
Nombre del cultivo:
Ag2CIL, Ag2SIL, Ag3CIL, Ag3SIL- E. coli
Muestra Área inhibida por zona
Área de la venda
100 × Área inhibida por zona ÷ Área de la
venda
% de inhibición respecto al tamaño
de la venda
Mejores resultados
(*)
2S 2.547 1.427 178.486335 78
3S 2.528 1.533 164.9054142 65
2C 2.285 1.202 190.0998336 90 *
3C 3.427 1.393 246.0157933 146 *
El procedimiento anterior se realizó para cada una de las pruebas antimicrobianas, posteriormente se obtuvo un promedio de todos los resultados, para finalmente con este resultado comparar todas las pruebas realizadas. En la Tabla 17 se muestra una de las tablas donde se recopilaron los resultados de la estandarización de los datos de las pruebas antimicrobianas y se obtuvieron los promedios.
68 Tabla 17. Promedios de los resultados de la estandarización de los datos de las pruebas
antimicrobianas
VHAg-2,3-G-SLI, CLI E. coli
# de Experimento 3S
% de inhibición
2S
% de inhibición
3C
% de inhibición
2C
% de inhibición
1 65 78 146 90
2 122 107 228 213
3 70 51 173 77
4 64 46 194 126
Promedio 80.25 70.5 185.25 126.5
Finalmente, después de obtener todos los promedios de todas las muestras, se logró analizar y comparar entre todos los sustratos y así, concluir cuales muestras presentaron mejores resultados.
69
REFERENCIAS
[1] Innovation, «Dr. Feynman's Small Idea,» Technology Commercialization, vol. 5, nº 5, 2007.
[2] S. Pal, K. Yu y J. Myong Song, «Does the Antibacterial Activity of Silver Nanoparticles Depend on the Shape of the Nanoparticle? A Study of the Gram-Negative Bacterium Escherichia coli,» Applied and environmental microbiology, vol. 73, nº 6, p. 1712, 2007.
[3] J. P. Heggers, J. W. Richard y Spencer, «Acticoat versus Silverlon: The Truth: 150.,» Journal of Burn Care & Research, vol. 23, p. 115, 2002.
[4] J. Shen, M. Shi y N. Li, «Facile Synthesis and Application of Ag-Chemically Converted Graphene Nanocomposite,» Nano Research, vol. 3, p. 340, 2010.
[5] O. Akhavan y E. Ghaderi, «Toxicity of Graphene and Graphene Oxide Nanowalls Against,»
American Chemical Society, vol. 4, nº 10, p. 5731, 2012.
[6] J. R. Morones, J. L. Elechiguerra y A. Camacho, «The bactericidal effect of silver nanoparticles,» Nanotechnology, vol. 16, p. 2346, 2005.
[7] E. Ahmeda, F. Aggora y A. Awada, «An innovative method for preparation of nanometal hydroxide superabsorbent hydrogel,» Carbohydrate Polymers, vol. 91, p. 693, 2013.
[8] A. S. Hoffman, «Hydrogels for biomedical applications,» Advanced Drug Delivery Reviews, vol. 54, p. 4, 2002.
[9] D. L. O. Wichterle, «Hydrophilic gels in biologic use,» Nature, p. 117, 1960.
[10] B. Zavan, R. Cortivo y G. Abatangelo, «Hydrogels and Tissue Engineering,» de Hydrogels:
Biological Properties and Applications, Milán, Italia, Springer, 2009, pp. 1-3.
[11] W. Zhao, X. Jin, Y. Cong, Y. Liud y J. Fu, «Degradable natural polymer hydrogels for articular cartilage tissue engineering,» Journal of Chemical Technology and Biotechnology, vol. 88, nº 3, pp. 327-328, 2012.
[12] H. Omidian y K. Park, «Hydrogels,» de Fundamentals and Applications of controlled Release Drug Delivery, New York, Spinger, 2012, pp. 75-81.
[13] R. D. Rogers y K. Seddon, «Ionic Liquids - Solvents of the Future?,» Science, vol. 302, nº 5646, pp. 792-793, 2003.
[14] J. S. Wilkes, P. Wasserscheid y T. Welton, «Introduction,» de Ionic Liquids in Synthesis, Alemania, Wiley-VCH, 2008, pp. 1-2.
70 [15] T. E. Rodríguez y M. D. Bermúdez Olivares, «Estudio de interacciones superficiales y
recubrimientos de líquidos iónicos sobre metales,» Jornadasde Introducción a la Investigación de la UPCT, nº 5, p. 57, 2012.
[16] C. Ye, W. Liu, Y. Chen y L. Yu, «Room-temperature ionic liquids: a novel versatile lubricant,»
ChemComm Communication, p. 2244, 2001.
[17] R. Swatloski, S. Spear, J. Holbrey y R. Rogers, «Dissolution of cellulose with ionic liquids,»
Journal of the American Chemical Society, vol. 124, nº 8, p. 4974, 2002.
[18] W. Guo, N. Sun y X. Qin, «A novel electrochemical aptasensor for ultrasensitive detection of kanamycin based on MWCNTs–HMIMPF6 and nanoporous PtTi alloy,» Biosensors and Bioelectronics, vol. 74, p. 691, 2015.
[19] T. Fukushima, A. Kosaka y Y. Ishimura, «Molecular Ordering of Organic Molten Salts Triggered by Single-Walled Carbon Nanotubes,» Science, vol. 300, p. 2072, 2003.
[20] D. P. Clark y N. J. Pazdernik, «Nanobiotechnology,» de Biotechnology, Illinois, Elsevier, 2016, pp. 220-221.
[21] «The Understanding Nanotechnology,» 2016. [En línea]. Available:
http://www.understandingnano.com/nanotech-applications.html.
[22] W.-T. Liu, «Nanoparticles and Their Biological and Environmental Applications,» Jorunal of bioscience and bioengineering, vol. 102, nº 1, p. 1, 2006.
[23] M. Ferrari, «Cancer nanotechnology: opportunities and challenges,» Nature Reviews, vol. 5, p. 161, 2005.
[24] D. P. Clark y N. J. Pazdernik, «Biological Warfare: Infectious Disease and Bioterrorism,» de Biotechnology, Illinois, Elsevier, 2016, p. 693.
[25] I. Das y S. Ansari, «Nanomaterials in science and technology,» Journal of Scientific &
Industrial Research, vol. 68, p. 658, 2009.
[26] C. Gutierrez Wing, «Las nanopartículas: pequeñas estructuras con gran potencial,» El ININ, pp. 24-26.
[27] F. Ruiz, «Nanopartículas metálicas,» Ciencia y Desarrollo: El conocimiento a tu alcance.
CONACYT, Mayo 2006.
[28] Á. B. Sifontes, L. Melo, C. Maza y J. J. Mendez, «Preparación de nanopartículas de plata en ausencia de polimeros estabilizantes,» Química Nova, vol. 33, nº 6, p. 1266, 2009.
[29] J. J. Castellano, S. M. Shafii, F. Ko y G. Donate, «Comparative evaluation of silver-containing antimicrobial dressings and drugs,» International Wound Journal, vol. 4, nº 2, p. 114, 2007.
71 [30] I. Sondi y B. Salopek-Sondi, «Silver nanoparticles as antimicrobial agent: a case study on E.
coli as a model for Gram-negative bacteria,» Journal of Colloid and Interface Science, vol.
275, pp. 177-178, 2004.
[31] M. Herrera, P. Carrión, P. Baca, J. Liébana y A. Castillo, «In vitro antibacterial activity of glass-ionomer cements.,» Microbios, vol. 104, nº 409, p. 141, 2001.
[32] M. Bosetti, A. Massè, E. Tobin y M. Cannas, «Silver coated materials for external fixation devices: in vitro biocompatibility and genotoxicity,» Biomaterials, vol. 23, nº 3, p. 887, 2002.
[33] A. Slistan-Grijalva, R. Herrera-Urbina y J. Rivas-Silva, «Synthesis of silver nanoparticles in a polyvinylpyrrolidone (PVP) paste, and their optical properties in a film and in ethylene glycol,» Materials Research Bulletin, vol. 43, pp. 90-91, 2008.
[34] E. Ramírez-Meneses, K. Philippot y B. Chaudret, «Influence of the Reaction Media on the Stabilization of Rhodium Nanostructures,» Ingeniería Investigación y Tecnología, vol. 16, nº 2, p. 226, 2015.
[35] P. Raveendran, F. Jie y S. L. Wallen, «A simple and ‘‘green’’ method for the synthesis of Au, Ag, and Au–Ag alloy nanoparticles,» Green Chemistry, vol. 8, p. 34, 2005.
[36] M. Monge, «Nanopartículas de plata: Métodos de síntesis en disolución y propiedades bactericidas,» An. Química, vol. 105, nº 1, p. 34, 2009.
[37] K. L. Da Silva, D. Menzel y A. Feldhof, «Mechanosynthesized BiFeO3 Nanoparticles with Highly Reactive Surface and Enhanced Magnetization,» The Journal of Physical Chemistry, vol. 115, p. 7210, 2011.
[38] T. Tsuji, T. Kakita y M. Tsuji, «Preparation of nano-size particles of silver with femtosecond lase ablation in water,» Applied Surface Science, vol. 206, p. 314, 2003.
[39] R. Zanella, «Metodologías para la síntesis de nanopartículas,» Mundo Nano, vol. 5, nº 1, p.
74, 2012.
[40] H. W. Kroto, J. R. Heath, S. C. O'Brien y R. F. Curl, «C60: Buckminsterfullerene,» Nauture, p. 162, 1985.
[41] W. Krätschmer, L. D. Lamb y K. Fostiropoulos, «Solid C60: a new form of carbon,» Nature, vol. 347, p. 354, 1990.
[42] S. Iijima, «Helical microtubules of graphitic carbon,» Nature, vol. 354, p. 56, 1991.
[43] S. Iijima y T. Ichihashi, «Single-shell carbon nanotubes of 1-nm diameter,» Nature, vol. 363, p. 603, 1993.
[44] M. I. Katsnelson, «Graphene: carbon in two dimensions,» Materials Today, vol. 10, nº 1-2, pp. 20-21, 2007.
72 [45] J. Wu, W. Pisula y K. Mullen, «Graphenes as Potential Material for Electronics,» Chem Rev,
vol. 107, pp. 718-719, 2007.
[46] S. Niyogi, E. Bekyarova y E. Mikhail, «Solution Properties of Graphite and Graphene,» JACS Communications, vol. 128, p. 7720, 2006.
[47] J. Hedberg, «Free Science Images,» 2015. [En línea]. Available:
http://www.jameshedberg.com/scienceGraphics.php?sort=graphene&id=graphene-sheet- wavey.
[48] D. Chen, H. Feng y J. Li, «Graphene Oxide: Preparation, Functionalization, and Electrochemical Applications,» Chemical Reviews, vol. 112, p. 6027, 2012.
[49] D. R. Dreyer, S. Park y C. W. Bielawski, «The chemistry of graphene oxide,» Chemical Society Reviews, vol. 39, p. 233, 2009.
[50] Y. Zhu, S. Murali, W. Cai y X. Li, «Graphene and Graphene Oxide: Synthesis, Properties and Applications,» Advanced Materials, vol. 22, pp. 3906-3924, 2010.
[51] A. Lerf, A. Buchsteiner y J. Pieper, «Hydration behavior and dynamics of water molecules in graphite oxide,» Journal of Physics and Chemistry Of Solids, vol. 67, p. 1106, 2006.
[52] W. Hu, C. Peng y W. Luo, «Graphene-Based Antibacterial Paper,» ACS NANO, vol. 4, nº 7, p. 4317, 2010.
[53] D. A. Dikin, S. Stankovich y E. J. Zimney, «Preparation and characterization of graphene oxide paper,» Nature PublishingGroup, vol. 448, p. 459, 2007.
[54] X. Sun, Z. Liu y K. Welsher, «Nano-Graphene Oxide for Cellular Imaging and Drug Delivery,» Nano Research, vol. 1, nº 3, p. 204, 2008.
[55] M. Aviv, I. Berdicevsky y M. Zilberman, «Gentamicin-Loaded Bioresorbable Films for Prevention of Bacterial Infections Associated with Orthopedic Implants,» InterScience, p. 10, 2006.
[56] S. P. S. y W. Costerton, «Antibiotic Resistance of Bacteria in Biofilms,» Lancet, vol. 358, p.
136, 2001.
[57] C. Wei, W.-Y. Lin y Z. Zania, «Bactericidal Activity of TiO2 Photocatalyst in Aqueous Media: Toward a Solar-Assisted Water Disinfection System,» Environmental Science Technology, vol. 28, p. 934, 2002.
[58] J. Chen, H. Peng y X. Wang, «Graphene oxide exhibits broad-spectrum antimicrobial activity against bacterial phytopathogens and fungal conidia by intertwining and membrane perturbation,» Nanoscale, vol. 6, pp. 1879-1889, 2014.
73 [59] K. Krishnamoorthy y M. Veerapandian, «Antibacterial Efficiency of Graphene Nanosheets
against Pathogenic Bacteria via Lipid Peroxidation,» The Journal of Physical Chemistry, vol.
116, p. 17280−17287, 2012.
[60] J. Soldevilla Agreda, J.-E. Torra i Bou y J. Posnett, «Una aproximación al impacto del coste económico del tratamiento de las úlceras por presión,» GEROKOMOS, vol. 18, nº 4, pp. 201- 210, 2007.
[61] G. D. Winter, «Formation of the Scab and the Rate of Epithelization of Superficial Wounds in the Skin of the Young Domestic Pig,» Nature, vol. 193, pp. 293-294, 1962.
[62] C. K. Field y M. D. Kerstein, «Overview of wound healing in a moist environment,» The American Journal of Surgery, vol. 167, nº 1, pp. 2-6, 1994.
[63] B. J., «Moist wound healing: a concept that changed our practice,» J Wound Care, vol. 13, nº 6, pp. 227-228, 2004.
[64] S. Rimmer, «Requirements of an ideal wound care system,» de Biomedical Hydrogels:
Biochemistry, Manufacture and Medical Applications, Cambridge, UK, Woodhead Publishing, 2011, p. 186.
[65] D. L. Chandler, «New Institute Will Accelerate Innovations in Fibers and Fabrics,» MIT News Office, 1 Abril 2016.
[66] A. Villafán, «Desarrollan en UAM textiles funcionales,» CONACYT: Agencia Informativa.
Radio con Ciencia, 21 Noviembre 2015.
[67] L. D. Carreño Pineda y L. A. Caicedo Mesa, «Técnicas de fermentación y aplicaciones de la celulosa bacteriana,» Revista de Ingeniería y Ciencia, vol. 8, nº 16, p. 307, 2012.
[68] T. Maneerung y S. Tokura, «Impregnation of silver nanoparticles into bacterial cellulose for antimicrobial wound dressing,» Carbohydrate Polymers, vol. 72, pp. 49-50, 2008.
[69] X. Zeng, D. T. McCarthy, A. Deletic y X. Zhang, «Silver/Reduced Graphene Oxide Hydrogel as Novel Bactericidal Filter for Point-of-Use Water Disinfection,» Advanced Functional Materials, vol. 25, p. 4344–4351, 2015.
[70] Z. Fan, B. Liu y J. Wang, «A Novel Wound Dressing Based on Ag/Graphene Polymer Hydrogel: Effectively Kill Bacteria and Accelerate Wound Healing,» Advanced Functional Material, vol. 24, pp. 3933-3943, 2014.
[71] P. Yu, H. Zhou y N. Zhu, «A facile approach to construction of a stable water-miscible ionic liquid/electrolyte interface with interactions between imidazolium moiety and carbon nanotubes,» Electrochemistry Communications, vol. 11, p. 1393, 2009.
74 [72] T. Fukushima, A. Kosaka y Y. Yamamoto, «Dramatic Effect of Dispersed Carbon Nanotubes
on theMechanical and Electroconductive Properties ofPolymers Derived from Ionic Liquids,»
Small Journal, vol. 2, nº 4, p. 554, 2006.
[73] M. L. Polo-Luque, B. M. Simonet y M. Valcárcel, «Solid phase extraction-capillary electrophoresis determination of sulphonamide residues in milk samples by use of C18-carbon nanotubes as hybrid sorbent materials,» The Roal Society of chemistry, vol. 138, p. 3787, 2013.
[74] M. Zhao, Y. Gao y L. Zheng, «Lyotropic liquid crystalline phases formed in binary mixture of 1-tetradecyl-3-methylimidazolium chloride/ethylammonium nitrate and its application in the dispersion of multi-walled carbon nanotubes,» Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 369, p. 95, 2010.
[75] F. Lu, S. Zhang y L. Zheng, «Dispersion of multi-walled carbon nanotubes (MWCNTs) by ionic liquid-based phosphonium surfactants in aqueous solution,» Journal of Molecular Liquids, vol. 173, p. 42, 2012.
[76] Y. Zhang, G. Guo y F. Zhao, «A Novel Glucose Biosensor Based on Glucose OxidaseImmobilized on AuPt Nanoparticle – Carbon Nanotube – IonicLiquid Hybrid Coated Electrode,» Electroanalysis, vol. 22, nº 2, p. 223, 2010.
[77] M. L. Polo-Luque, B. M. Simonet y M. Valcárcel, «Functionalization and dispersion of carbon nanotubes in ionic liquids,» Trends in Analytical Chemistry, vol. 47, p. 101, 2013.
[78] D. J. Leaper, «Silver dressings: their role in wound management,» International Wound Journal, vol. 3, nº 4, p. 282, 2006.
[79] H. Yu, X. Xu y X. Chen, «Preparation and Antibacterial Effects of PVA-PVP Hydrogels Containing Silver Nanoparticles,» Journal of Applied Polymer Science,, vol. 103, p. 125, 2006.
[80] G. Rodríguez-Delgado, I. Yáñez-Flores, S. Sánchez-Valdes y O. Rodríguez-Fernández,
«Preparation and Characterization of Acrylic Acid/Itaconic Acid Hydrogel Coatings Containing Silver Nanoparticles,» Journal of Applied Polymer Science, vol. 130, nº 4, p. 2714, 2013.
[81] M. G. Freire, C. M. Neves y I. M. Marrucho, «Hydrolysis of Tetrafluoroborate and Hexafluorophosphate Counter Ions in Imidazolium-Based Ionic Liquids,» The Journal of Physical Chemistry A, vol. 114, p. 3744, 2010.
[82] S. Jegatheeswaran, S. Selvam, S. Ramkumar y M. Sundrarajan, «Novel strategy for f- HAp/PVP/Ag nanocomposite synthesis from fluoro based ionic liquid assistance: Systematic investigations on its antibacterial and cytotoxicity behaviors,» Materials Science and Engineering, vol. 67, p. 10, 2016.
75 [83] S. M. Lee, K. C. Song y B. S. Lee, «Antibacterial activity of silver nanoparticles prepared by
a chemical reduction method,» Korean Journal of Chemical Engineering, vol. 27, nº 2, p. 690, 2010.
[84] J. S. Kim, E. Kuk y K. N. Yu, «Antimicrobial effects of silver nanoparticles,» Nanomedicine, vol. 3, p. 96, 2007.
[85] K. C. Song, S. M. Lee, T. S. Park y B. S. Lee, «Preparation of colloidal silver nanoparticles by chemical reduction method,» Korean Journal of Chemical Engineering, vol. 26, nº 1, p.
154, 2009.
[86] J. Wang, H. Chu y Y. Li, «Why Single-Walled Carbon Nanotubes Can Be Dispersed in Imidazolium-Based Ionic Liquids,» American Chemical Society, vol. 2, nº 12, p. 2543, 2008.
[87] R. Wang, J. Ma, X. Zhou, Z. Wang y H. Kang, «Design and Preparation of a Novel Cross- Linkable, High Molecular Weight, and Bio-Based Elastomer by Emulsion Polymerization,»
Macromolecules, vol. 45, pp. 6834-6835, 2012.
[88] RRUFF, «Search RRUFF Sample Data,» [En línea]. Available:
http://rruff.info/Silver/R070463.
[89] O. M. Samir, S. Madhu y R. Somashekar, «X-ray Diffraction Analysis of Yemeni Cotton Fibers,» Fibers and Polymers, vol. 11, nº 3, p. 417, 2012.
[90] E. N. Johnson Ford y S. K. Mendon, «X-ray Diffraction of Cotton Treated with Neutralized Vegetable Oil-based Macromolecular Crosslinkers,» Journal of Engineered Fibers and Fabrics, vol. 5, nº 1, p. 13, 2010.
[91] N. Agasti y N. K. Kaushik, «One Pot Synthesis of Crystalline Silver Nanoparticles,» American Journal of Nanomaterials, vol. 2, nº 1, p. 6, 2014.
[92] M. Govarthanan, T. Selvankumar y K. Manoharan, «Biosynthesis and characterization of silver nanoparticles using panchakavya,» International Journal of Nanomedicine, vol. 9, p.
1596, 2014.
[93] B. Mahltig, H. Haufe y H. Böttcher, «Functionalisation of textiles by inorganic sol–gel coatings,» Journal of Materials Chemistry, vol. 15, p. 4395, 2005.
[94] U. B. Demirci, A. Ouardia y J. Andrieux, «Sodium borohydride hydrolysis as hydrogen generator: issues, state of the art and applicability upstream from a fuel cell,» Fuel Cells, vol.
10, nº 3, p. 2, 2010.
[95] U. B. Mieleabc, Demirci y Philippe, «Sodium borohydride versus ammonia borane, in hydrogen storage and direct fuel cell applications,» Energy & Environmental Science, vol. 2, p. 629, 2009.