Alcances y Limitaciones

The options available in this type of programming are described below.

5.12.1 Vertical cut along the X axis

1) From the «EDITOR\ASSISTED» page, select the instrument and the command .

2) Press the ENTER key to set up the fields as indicated below:

<Y>: coordinate of the cut along Y axis.

<Xi>: initial coordinate of the cut along X axis.

<Xf>: final coordinate of the cut long X axis.

<CAM>: access to setting of the technological data fields, listed below.

Technological item <T>: name of the tool. Press ENTER for access to the list.

Technological item <S>: slot activation. The first field on the left is used to select the number of the slot to be used during processing; to use another slot simultaneously, select the name in the second field. If the slots are not selected in the fields, the system

activates the first slot containing the chosen tool, by default.

Technological item <Depth>: processing depth.

Technological item <Interp. speed>: not usable.

Technological item <Entry speed>: speed at which the tool enters the panel.

Technological item <Rotation speed>: tool rotation speed.

Technological item <No. steps>: number of times the tool enters the panel, to carry out the process (zero is equivalent to 1).

3) Press the ENTER key on the <OK> field to confirm the programming; to abort press ESC.

Y X Z prf

Xi

Xf

Xi Xf

Y

5

BIESSE S.p.A. Woodworking Machinery

0405e02f.fm - biesse120100

5.12.2 Vertical cut along the Y axis

1) From the «EDITOR\ASSISTED» page, select the instrument and the command .

2) Press the ENTER key to set up the fields as indicated below.

<X>: coordinate of the cut along X axis.

<Yi>: initial coordinate of the cut along Y axis.

<Yf>: final coordinate of the cut long Y axis.

<CAM>: access to setting of the technological data fields, listed below.

Technological item <T>: name of the tool. Press ENTER for access to the list.

Technological item <S>: slot activation. The first field on the left is used to select the number of the slot to be used during processing; to use another slot simultaneously, select the name in the second field. If the slots are not selected in the fields, the system

activates the first slot containing the chosen tool, by default.

Technological item <Depth>: processing depth.

Technological item <Interp. speed>: not usable.

Technological item <Entry speed>: speed at which the tool enters the panel.

Technological item <Rotation speed>: tool rotation speed.

Technological item <No. steps>: number of times the tool enters the panel, to carry out the process (zero is equivalent to 1).

3) Press the ENTER key on the <OK> field to confirm the programming; to abort press ESC.

Y X

Z

prf

Yi

Yf

Yf

X

Yi

PROGRAMMING CUTTING

BIESSE S.p.A. Woodworking Machinery

0405e02f.fm - biesse120100

5.12.3 Vertical cutting with positioning by means of the C axis

1) From the «EDITOR\ASSISTED» page, select the instrument and the command .

2) Press the ENTER key to set up the fields as indicated below:

<Xi>: initial coordinate of the cut along the X axis.

<Yi>: initial coordinate of the cut along the Y axis.

In the <Tip> field, select the type of data setting used to define the final part of the cut.

The following is a list of all the setting types::

<CAM>: access to setting of the technological data fields, listed below.

Technological item <T>: name of the tool. Press ENTER for access to the list.

Technological item <S>: slot activation. The first field on the left is used to select the number of the slot to be used during processing; to use another slot simultaneously, select the name in the second field. If the slots are not selected in the fields, the system

activates the first slot containing the chosen tool, by default.

Technological item <Depth>: processing depth.

Technological item <Interp. speed>: not usable.

Technological item <Entry speed>: speed at which the tool enters the panel.

Technological item <Rotation speed>: tool rotation speed.

Technological item <No. steps>: number of times the tool enters the panel, to carry out the process (zero is equivalent to 1).

3) Press the ENTER key on the <OK> field to confirm the programming; to abort press ESC.

<XFYF> <Xf>: final coordinate of the cut along the X axis.

<Yf>: final coordinate of the cut along the Y axis.

<XFAR>

<Xf>: final coordinate of the cut along the X axis.

<Ar>: angle of the cut in relation to the side of the panel in common with the X axis direction.

<YFAR>

<Yf>: final coordinate of the cut along the Y axis.

<Ar>: angle of the cut in relation to the side of the panel in common with the X axis direction.

<DAR>

<D>: length of the cut.

<Ar>: angle of the cut in relation to the side of the panel in common with the X axis direction.

5

BIESSE S.p.A. Woodworking Machinery

0405e02f.fm - biesse120100