About This Chapter
In the local eNodeB commissioning through the USB storage device, you can upgrade the eNodeB software and data configuration file by using the USB storage device, and check the running status of the eNodeB by the LEDs. Then, create the eNodeB commissioning task on the M2000 server.
5.1 Local eNodeB Commissioning Through the USB Storage Device
This section describes the procedure of local eNodeB commissioning through the USB storage device.
5.2 Preparations for the Local eNodeB Commissioning Through the USB Storage Device
Before the local eNodeB commissioning through the USB storage device, you need to collect the related eNodeB information, arrange for commissioning tools and digital certificates, and save the required files to the USB storage device.
5.3 Downloading and Activating the Software and Data Configuration File Through the USB Storage Device
This section describes how to download and activate the eNodeB software and data configuration file through the USB storage device. The eNodeB automatically downloads the software and data configuration file from the USB storage device, and then activates them. The software and data configuration take effect after the eNodeB resets.
5.4 Checking the Status of LEDs
5.1 Local eNodeB Commissioning Through the USB Storage
Device
This section describes the procedure of local eNodeB commissioning through the USB storage device.
Figure 5-1 shows the procedure of local eNodeB commissioning through the USB storage device.
Table 5-1 eNodeB commissioning procedure through the USB storage device
Step Operation Manda
tory/ Option al 1 Local and remote cooperative operations
Make preparations for the local eNodeB commissioning, which involves obtaining the eNodeB information and commissioning tools, configuring the security equipment, and obtaining associated files and digital certificates. For details, see 5.2 Preparations for the Local eNodeB Commissioning Through the USB Storage Device.
Mandat ory
2 Local
operations
Download and activate the eNodeB software and data configuration through the USB storage device. For details, see 5.3 Downloading and Activating the Software and Data Configuration File Through the USB Storage Device.
Mandat ory
3 Learn the running status of the eNodeB by viewing the eNodeB LEDs on site. For details, see 5.4 Checking the Status of LEDs. Mandat ory 4 Remote operations on the M2000
After the eNodeB is connected to the M2000, create the eNodeB commissioning task on the M2000. For details, see 4.3 Creating the eNodeB Commissioning Task on the M2000.
NOTE
If the eNodeB software and data configuration are already upgraded to the target version through the USB storage device on site, you need to click Advanced when importing the EDS file on the M2000, and then clear the DownloadSoftware,
DownloadData, and ActSoftware check boxes in the displayed Set Steps dialog box. In this case, these cleared steps are skipped in the automatic eNodeB commissioning.
Mandat ory
5 Manage the eNodeB commissioning task on the M2000. For details, see 4.4 Managing the eNodeB
Commissioning Task.
Mandat ory 6 Obtain the eNodeB commissioning report. For details, see
4.5 Obtaining the eNodeB Commissioning Report on the M2000.
Mandat ory 7 Learn the running status of the eNodeB by viewing the
eNodeB commissioning report. For details, see 4.6 Checking the Running Status of the eNodeB on the M2000.
Mandat ory
8 Commission the TMA on the M2000. For details, see 4.7 Commissioning the TMA on the M2000.
Optiona l 9 Commission the antenna system on the M2000. For details,
see 4.8 Commissioning the Antenna System on the M2000.
Optiona l
Step Operation Manda tory/ Option al 10 Local and remote cooperative operations
After the environment monitoring equipment is connected, perform the commissioning and enable the environment monitoring equipment to function properly. For details, see 4.9 Commissioning the Environment Monitoring Equipment on the M2000.
Optiona l
11 Setting the Maximum TX Power of RRU or RFU. For
details, see 4.10 Setting the Maximum TX Power of RRU or RFU.
Optiona l 12 Verify the basic services of the eNodeB. For details, see
4.11 Testing the Basic Services of the eNodeB.
Mandat ory 13 Remote operations on the M2000
After the eNodeB commissioning is complete, confirm the eNodeB commissioning task. For details, see 4.12
Acknowledging the eNodeB Commissioning on the M2000.
Mandat ory
5.2 Preparations for the Local eNodeB Commissioning
Through the USB Storage Device
Before the local eNodeB commissioning through the USB storage device, you need to collect the related eNodeB information, arrange for commissioning tools and digital certificates, and save the required files to the USB storage device.
5.2.1 Arranging for Related Information and Tools Required for the eNodeB Commissioning Through the USB Storage Device
Before the local eNodeB commissioning through the USB storage device, you need to arrange for the related eNodeB information and tools.
5.2.2 Configuring the Security Equipment
When the security gateway (GW) is deployed in the network, you need to configure data for the security GW. In the case that the IEEE 802.1x authentication is adopted, the authentication access equipment and the authentication server should be configured. Generally, an authentication server is the Authentication, Authorization and Accounting (AAA) server.
5.2.3 Obtaining the Digital Certificate Required for the eNodeB Commissioning Through the USB Storage Device
When the security GW is deployed in the network, the eNodeB and the security GW need to identify each other through the digital certificate. Therefore, the digital certificate is required for the eNodeB commissioning. The digital certificate on the eNodeB side incorporates the operator's cross certificate signed by Huawei, operator's root certification authority (CA) certificate (or CA certificate chain with the root CA certificate), and operator's certificate revocation list (CRL). The digital certificate on the security GW side incorporates Huawei root CA certificate and Huawei CRL file.
5.2.4 Obtaining the Files Required for the eNodeB Commissioning Through the USB Storage Device
Before the local eNodeB commissioning through the USB storage device, you need to save the required files in a specified directory in the USB storage device.
5.2.1 Arranging for Related Information and Tools Required for the
eNodeB Commissioning Through the USB Storage Device
Before the local eNodeB commissioning through the USB storage device, you need to arrange for the related eNodeB information and tools.
Procedure
Step 1 Collect the information related to the eNodeB, as described in Table 5-2.