IMPUESTOS A LA RENTA: PATRIMONIALES, HEREDITARIOS, LEGADOS Y DONACIONES, INGRESOS GRAVADOS DE VALOR DE LOS BIENES Y
3.3. Como medidas de reparación integral adicionales se dispone:
7.6.1
Starting the Viewer automatically in the background
To speed up document display in the Viewer, the various Viewer windows can be loaded automatically in the background whenever you start DocuWare. One Viewer window (Viewer 1) is loaded by default. You can define settings for this under either HKEY_LOCAL_MACHINE or HKEY_CURRENT_USER. The settings in HKEY_CURRENT_USER will overwrite the settings in HKEY_LOCAL_MACHINE.
HKEY_CURRENT_USER\Software\DocuWare\DocuWare\DACS \VIEW1 (Viewer 1 ) HKEY_CURRENT_USER\Software\DocuWare\DocuWare\DACS \VIEW2 (Viewer 2 ) HKEY_CURRENT_USER\Software\DocuWare\DocuWare\DACS \VIEW3 (Viewer 3 ) HKEY_CURRENT_USER\Software\DocuWare\DocuWare\DACS
\PRINT (Viewer during printing)
HKEY_CURRENT_USER\Software\DocuWare\DocuWare\DACS
\Scan (Viewer during scanning)
HKEY_CURRENT_USER\Software\DocuWare\DocuWare\DACS
DocuWare Windows Client
You can define two settings under each of these nodes: one Preload value and one StayOpen value.
Preload=0 The Viewer window is not automatically started in the background.
Preload=1 The Viewer window is loaded in the background when you start DocuWare and closed when you close DocuWare.
Preload=2 The viewer window opens when a document is displayed for the first time. Even after the viewer window has been closed, the viewer stays in the memory for a specified time (see below). This is so that it can be used again quickly the next time a document is displayed. After the specified time has expired, the viewer is closed completely and unloaded from the memory.
When DocuWare is closed, the viewer is also closed (and unloaded), even if the StayOpen time has not expired.
StayOpen=x If Preload=2 is set, this value specifies how many minutes the Viewer window should remain open after DocuWare has been closed.
7.6.2
Multiple Viewer instances
DocuWare can open up to four Viewer instances.
The TOOLKIT which is used by CONTENT-FOLDER for displaying documents regularly calls up the fourth Viewer instance. Starting with DocuWare 5.1 a default has been implemented enabling TOOLKIT to open up a further instance – the first.
This is defined in the registry under
HKEY_LOCAL_MACHINE\SOFTWARE\DocuWare\DocuWare\DACS\TOOLKIT with this entry of type DWORD: UseSingleViewerHandle
UseSingleViewerHandle=0 means that TOOLKIT can open multiple Viewer windows. UseSingleViewerHandle=1 means that TOOLKIT can open one Viewer window only.
When to use:
If you want to display documents from several CONTENT-FOLDER folders at the same time in different windows, you must set UseSingleViewerHandle=0.
If UseSingleViewerHandle=1, the documents from the different CONTENT-FOLDER folders are shown in the same Viewer, which means you can look at them only one by one. However, by setting
7.6.3
Timeout for loading documents
You can specify a time limit for loading documents into the Viewer. The default value is 1 minute. For changing the value, go to this key:
HKEY_CURRENT_USER\Software\DocuWare\DocuWare\DACS\500 DWORD value : StartTimeout; Default 60000 Milliseconds
The entry must be adjusted here - simply type in the desired value.
The smallest value accepted is 10 seconds (value 10000) and the largest is 5 minutes (value 300000) .
7.6.4
Printing out of the Viewer
The Viewer checks the first page of a document. If this is a TIFF document or color document, then the entire document will be printed using the DPI amount of the first page.
7.6.5
Storing Scanner and Printer Settings (incl. TIFFMAKER)
Scanner and printer settings (incl. TIFFMAKER) can be either stored in HKEY_CURRENT_USER or in HKEY_LOCAL_MACHINE. If individual users need to store their settings, they must be stored under HKEY_CURRENT_USER.
To define the storage location for scanner and printer settings in the registry, go to DocuWare Administration General – Miscellaneous – General Settings – Storing Scanner and Printer Settings. The default location is HKEY_LOCAL_MACHINE.
If TIFFMAKER is running in Server Mode, the settings cannot be stored in HKEY_CURRENT_USER since the Server cannot access this section.
If you change the location to store scanner and printer settings while TIFFMAKER is active, the previous storage location will at first be retained. Only after re-starting your computer TIFFMAKER will write these settings into the new location in the Registry. The same behaviour applies for ACTIVE IMPORT as well.
7.6.6
Text search in the Viewer
With TIFF formats, when you use the text search to search for two strings separated by a space, not only is the text that exactly matches the search expression highlighted in the TIFF document, but also any string where there is no space between the words.
Example:
You entered "Peter Miller" as the search text
Strings highlighted in TIFF document: "Peter Miller" and "PeterMiller"
This does not apply to external formats, only to TIFF documents and only if the search strings were sent to the viewer from the DocuWare search dialog box.
DocuWare Windows Client
7.6.7
Using New or Modified OCR and Barcode Configurations
If you use the Settings / OCR... or Barcode... menu of the Viewer to change existing OCR or barcode configurations or create new ones, these will not be available to you immediately, but stored on Content Server first. To load the new settings from the server, close DocuWare and then open it again.
7.6.8
Arabic Word Documents
When Word documents in Arabic, which is read from right to left, are displayed in the viewer, the word order is reversed when they are displayed.
7.6.9
Printer and Scanner settings
When you start the Viewer from within DocuWare, the printer and scanner settings are read from the organization settings.
If however you start the Viewer as a separate application without DocuWare, the default printer and scanner settings are read from HKEY_CURRENT_USER.
7.6.10
Predefining print quality for color printing
Normally when you print in color from the Viewer, the printer uses its default resolution. If you need a different resolution, you can specify another dpi value via an entry in the registry. Color printing will then be printed with this dpi value. If in the registry you define a dpi value that is not supported by the printer, the printer will print using the nearest available dpi value.
To predefine a dpi value, add the following entry to the registry under HKEY_CURRENT_USER\Software\DocuWare\DocuWare\DACS\500: ColorImagesPrintDPI of type DWORD.
Enter the dpi value you want to use as the value. If this entry is not available or the value is null, the printer’s default resolution is used.
For DocuWare REQUEST add the above registry entry under
HKEY_CURRENT_USER\Software\DocuWare\DocuWare REQUEST\DACS\500.
7.6.11
Stamp With Items in the Keyword Field
If you use a stamp, over which entries are written in a keyword, you can only add an entry to the keyword field in the Windows Client. In the Web Client however, several keywords can be written over the stamp in the keyword field.