Identificación de casos de Fractura de cadera

At the conclusion of these exercises, you will be able to: • Use the different rent adjustment methods

You will take the following steps:

• Define an adjustment term in the contract/object, simulate and convert to an update run, then make any changes necessary, enter approval, and finally activate it

Lease-outs can be adjusted using the free adjustment and index adjustment methods.

Select a lease-out as your adjustment object.

1 Adjust with an index.

1-1 Define an adjustment rule for index adjustment in your first internal lease-out. Use the RE Navigator for this.

Define the adjustment term Index adjustment with suggestion.

Change the minimum changes in points to 1 point and set the flexible adjustment frequency to earliest.

The index start should be January 1 of last year.

Assign the condition Office basic rent detail and save the contract. 1-2 Simulate and execute the index adjustment for your contract.

Use the object selection for this. First, perform only the activities determine adjustments and process adjustments.

Adjustment should occur as soon as possible and include occupancy contracts that are both subject to approval and not subject to approval.

Run the simulation and check the results. Change the simulation to update mode.

1-4 Activate the adjustment.

Check the condition amount change again and the change to the adjustment status for your contract in the RE Navigator.

2 Adjust by means of free adjustment.

2-1 In your residential lease-out, define an adjustment rule for free adjustment. Use the RE Navigator for this.

Define the adjustment term Free adjustment defined in the contract. Assign the condition Basic rent and save the contract.

2-2 Simulate and execute the free adjustment for your residential lease-out. Use the object selection for this.

The adjustment should affect all relevant condition types, with all calculation formulas.

The condition should be increased by 4.5%.

First, perform only the activities determine adjustments and process adjustments. Adjustment should occur as soon as possible and include occupancy contracts that are both subject to approval and not subject to approval.

Run the simulation and check the results. Change the date from which the new condition amount is valid to 01.05. of the current year. Enter the approval. Change the simulation to update mode and activate it.

2-3 Check the changes to the condition amount and to the adjustment status for your contract in the RE Navigator.

Solutions

Unit:

Adjustment of Conditions

Topic: Performing the Steps Required to Adjust

Conditions

1 Adjust with an index.

1-1 Define an adjustment rule for index adjustment in your first internal lease-out. Start the RE Navigator.

In the SAP menu, choose: Accounting → Flexible Real Estate Management →

RE Navigator → RE Navigator (RE80)

In the Navigation Area of the RE Navigator, change the display to My Objects and choose . Expand the Real Estate Contracts entry by pressing the icon on the left of the entry.

Double-click the number of your first internal lease-out and then choose (Changes Between Display <-> Change).

Go to the Adjustment tab page, choose (Create Term) and choose Indexadjustment with suggestio.

Expand the method-specific parameters by choosing next to the text.

Choose the icon to unlink from Customizing and to be able to make changes. Change the Min. Change Pts entry to 1 and the Flexible Freq. field to Earliest. Expand the object-specific parameters by choosing next to the text and check the date of the index start. Change this entry to January 1 of last year.

In the lower screen area, go to the Conditions tab page and choose to assign free condition(s) and then select Condition Type Office basic rent detail.

1-2 Simulate and execute an index adjustment.

In the SAP menu, choose: Accounting → Flexible Real Estate Management →

Adjustment of Conditions → Specify Adjustments (REAJPR)

Enter the following data:

Field Name or Data Type Values

Company Code 1000 Object Selection Active X

Object ID BE 1000/1##

Hierarchical Object Selection X

Ensure that the Mode field is filled with Simulate Adjustment Run. In the lower screen area, select the Index field.

Go to the Activities tab page and make sure that only the Determine Adjustments and Processing of Adjustments fields are selected.

Go to the Activity Parameters tab page, select the Next Possible Valid-From field and the OccupancyContracts field. Next to the OccupancyContracts field, change the entry in the Subject to Approvl field to Both.

Choose (Execute).

Select the displayed line and choose (Show detail).

Confirm the data with (Continue) and transfer the simulation with Change from Simulation to Update Mode.

Save the update run by pressing (Save). 1-3 Check the contract for changes.

Start the RE Navigator.

In the SAP menu, choose: Accounting → Flexible Real Estate Management →

RE Navigator → RE Navigator (RE80)

In the Navigation Area of the RE Navigator, change the display to My Objects and choose . Expand the Real Estate Contracts entry by pressing the icon on the left of the entry.

Double-click the number of your first internal lease-out and then go to the Adjustment tab page.

1-4 Activate the adjustment.

In the SAP menu, choose: Accounting → Flexible Real Estate Management →

Adjustment of Conditions → Edit Adjustments (REAJCH)

Place the cursor in the Identification field and call the F4 Help.

Double-click the entry next to your user name in the Entered column and choose (Execute) to call the adjustment data.

Select the displayed line and choose to activate the adjustment. Save the activation by pressing (Save).

To check for changes, restart the RE Navigator.

In the SAP menu, choose: Accounting → Flexible Real Estate Management →

RE Navigator → RE Navigator (RE80)

In the Navigation Area of the RE Navigator, change the display to My Objects and choose . Expand the Real Estate Contracts entry by pressing the icon on the left of the entry.

Double-click the number of your first internal lease-out and then go to the Adjustment tab page.

Go to the lower screen area, to the Conditions tab page, and click the Active Adjustment Exists entry.

Leave the results screen by choosing (Continue).

Go to the Conditions tab page of the contract. Change the management of time slots to Show all time periods.

2 Adjust by means of free adjustment.

2-1 In your residential lease-out, define an adjustment rule for free adjustment. Start the RE Navigator.

In the SAP menu, choose: Accounting → Flexible Real Estate Management →

RE Navigator → RE Navigator (RE80)

In the Navigation Area of the RE Navigator, change the display to My Objects and choose . Expand the Real Estate Contracts entry by pressing the icon on the left of the entry.

Double-click the number of your residential lease-out and then choose (Changes Between Display <-> Change).

Go to the Adjustment tab page, choose (Create Term) and select Free Adjustment defined in the contract.

In the lower screen area, go to the Conditions tab page and choose to assign free conditions, then select Condition Type Basic rent.

2-2 Simulate and execute an index adjustment.

In the SAP menu, choose: Accounting → Flexible Real Estate Management →

Adjustment of Conditions → Specify Adjustments (REAJPR)

Enter the following data:

Field Name or Data Type Values

Company Code 1000 Object Selection Active X

Object ID BE 1000/1##

Hierarchical Object Selection X

Ensure that the Mode field is filled with Simulate Adjustment Run. In the lower screen area, select the Free field.

Go to the Processing Paramet. tab page and choose (Insert Row). In the Incr. % field, enter 4,5.

Go to the Activities tab page and make sure that only the Determine Adjustments and Processing of Adjustments fields are selected.

Go to the Activity Parameters tab page, select the Next Possible Valid-From field and the OccupancyContracts field. Next to the OccupancyContracts field, change the entry in the Subject to Approvl field to Both.

Choose (Execute).

Select the displayed line and choose (Show detail). In the Corrected Fr-Dt field, enter 01.05.[current year].

Choose (Approve) and confirm with (Continue), then also confirm the changes with (Continue).

Convert the simulation with Change from Simulation to Update Mode, select the line again and choose to activate the adjustment.

Save the adjustment by pressing (Save). 2-3 To check for changes, restart the RE Navigator.

In the SAP menu, choose: Accounting → Flexible Real Estate Management →

RE Navigator → RE Navigator (RE80)

©SAP AG 2003