User Profile | Read Only, Maint., Read/Write, Admin.
The Report & Logger command manages the log of the equipment alarms, the log of the operations ex-ecuted by the users and the equipment configuration.
With log of the equipment alarms we mean the list of the status and alarm signals currently active on the equipment (current alarms) and the signals memorized in the equipment controller (alarm history).
With log of the operations we mean the list of the operations executed by all the users who can connect to the equipment. The list is stored in the equipment controller.
Operations
Save the log of the equipment alarms Delete the log of the equipment alarms
Save the log of the operations executed by the users Delete the log of the operations executed by the users Save the equipment configuration
GUI
Report & Logger contextual area
See also
Alarms management (info)
Save the log of the equipment alarms
User Profile | Read Only, Maint., Read/Write, Admin.
1. Select Main > Report & Logger.
2. Press Alarm Log.
In the Alarm Log window are displayed:
• Equipment Info. General parameters:
• Equipment ID. Equipment identifier.
• Equipment Type. Equipment type.
• Date. Date/time when it has been generated the report.
• Current Alarm Log and History Alarm Log. Respectively list of the current alarms and history alarms. Every single record identifies an alarm with the following information:
• Severity. Alarm severity.
• Status. Alarm status.
• Warning, Minor, Major or Critical. Alarm respectively with the Warning, Minor, Ma-jor or Critical severity.
• Status. Alarm status:
• On. Alarm active.
• Off. Alarm inactive (detected/cleared alarm). Meaningful only for alarm history.
• Date/Time. Detection or reset date and time of the alarm. The format of date/time changes according to the setting made in the operating system.
• Description. Alphanumeric string that specify the type of the alarm.
3. Press Download Report.
4. Set the path and the name of the file where you want to save the log and press Save.
The format, used to save the data to file, is the same displayed in the Alarm Log window.
Delete the log of the equipment alarms
User Profile | Read/Write, Admin.
1. Select Main > Report & Logger 2. Press Reset Alarm Logger and confirm.
A message indicates the end and the result of the operation.
Save the log of the operations executed by the users
User Profile | Read Only, Maint., Read/Write, Admin.
1. Select Main > Report & Logger.
2. Press Command Log.
In the Command Log window are displayed:
• Equipment Info. General parameters:
• Equipment ID. Equipment identifier.
• Equipment Type. Equipment type.
• Date. Date/time when it has been generated the report.
• Current Command Log. Operations list. Every record identifies an operation for which are re-ported:
• Performer. Type of user who has performed the operation:
• web. User of WEB LCT application.
• snmp. User of the NMS5UX-B/NMS5LX supervision system (NMS5UX user).
• cli. User of SM-OS application, connected to the equipment via serial line.
• remoteCli. User of SM-OS application, connected to the equipment via telnet.
• Action. Action performed by the user.
• Instance. Name of the equipment instance to which the operation refers.
• Value Set. Set value.
• User. Name of the user who has executed the operation.
• Source Address. IP address of the machine from which it has been executed the opera-tion.
• Date/Time. Date and time when it has been executed the operation. The format of date/
time changes according to the setting made in the operating system.
The empty box indicates that the information is not available, because not meaningful for the relevant type of operation.
3. Press Download Report.
4. Set the path and the name of the file where you want to save the log and press Save.
The format, used to save the data to file, is the same displayed in the Command Log window.
Delete the log of the operations executed by the users
User Profile | Read/Write, Admin.
1. Select Main > Report & Logger
2. Press Reset Command Logger and confirm.
A message indicates the end and the result of the operation.
Save the equipment configuration
User Profile | Read Only, Maint., Read/Write, Admin.
1. Select Main > Report & Logger.
2. Press Inventory Report.
In the Inventory Report window are displayed:
• Equip Info. General parameters:
• Equipment ID. Equipment identifier.
• Equipment Type. Equipment type.
• Date. Date/time when it has been generated the report.
• HW Inventory, SW Inventory, SW list, etc. Equipment parameters.
The whole equipment parameters are subdivided in groups.
The format of the parameters present in each group is self-explicative and changes according to the type of represented data.
3. Press Download Report.
4. Set the path and the name of the file where you want to save the log and press Save.
The format, used to save the data to file, is the same displayed in the Inventory Report window.
Report & Logger contextual area
The contextual area allows to save the log of the equipment alarms, the log of the operations executed by the users and the equipment configuration.
Push-button
Apply. Not available in this context.
Refresh. Update the context.
Help. Open the help on-line.
Reset Alarm Logger. Delete the log of the equipment alarms
Reset Command Logger. Delete the log of the operations executed by the users Alarm Log. Save the log of the equipment alarms
Command Log. Save the log of the operations executed by the users Inventory Report. Save the equipment configuration
See also
Report & Logger (command) Alarms management (info)