1. Photodegradation and Biodegradation by Bacteria of Mulching Films Based on Ethylene-Vinyl Acetate Copolymer: Effect of Pro-Oxidant Additives. C. Abrusci, J. L.
Pablos, I. Marín, E. Espí, T. Corrales, F. Catalina. 2012, Journal of Applied Polymer Science, Vol. 126, págs. 1664-1675.
2. Photostabilization study of ethylene-butyl acrylate copolymers functionalized in the molten state with hindered amine light stabilizers (HALS). L. López-Vilanova, E. Espí, I. Martinez, J.L.G. Fierro, T. Corrales, F. Catalina. 2013, Polymer Degradation and Stability, Vol. 98, págs. 2146-2152.
3. Effect of Carbon Black on UV stability of LLDPE films under artificial weathering conditions. M.Liu, A.R.Horrocks. 2002, Polymer Degradation and Stability , Vol. 75, págs. 485-499.
4. Electrical and optical properties of functionalized multiwalled carbon nanotubes/poly (3-octylthiophene)/ polystyrene composites. SS Ibrahim, Ayman S Ayesh. 2015, Journal of Thermoplastic Composite Materials, Vol. 28 (2), págs. 225-240.
5. Polyethylene: Preparation, Structure, and properties. S. L. Aggarwal, O. J. Sweeting.
1957, Chemical Reviews, Vol. 57, págs. 665-742.
6. Effect of γ -Irradiation on the Physicochemical Properties of LDPE/HCB and LDPE/iPP/HCB Composites. Z. I. Ali, H. H. Saleh. 2014, Advances in Polymer Technology, Vol. 33, págs. 21453 (E1-E9).
7. Thermal and mechanical properties of LDPE by the effects of organic peroxides. K.
Sirin, Ö. Cengel, M. Canli. 2017, Polymers for Advanced Technologies, Vol. 28, págs.
876-885.
8. Introduction of long-chain branches in linear polyethylene by light cross-linking with 1,3-benzenedisulfonyl azide. J.K. Jørgensen, A. Stori, K. Redford, E. Ommundsen.
2005, Polymer, Vol. 46, págs. 12256-12266.
9. A. J. Peacock. Handbook of Polyethylene: structures, properties and applications.
s.l. : Marcel Dekker. Inc., 2000. págs. 2-22; 375-414.
~ 99 ~
10. Influence of cocrystallization behavior on structure and properties of HDPE/LLDPE microporous membrane. C. Chen, R. Xu, X. Chen, J. Xie, F. Zhang, Y. Yang, C. Lei.
2016, Journal of Polymer Research, Vol. 23, págs. 1-9.
11. M.P. McDaniel. Handbook of Transition Metal Polymerization Catalysts. [aut. libro]
Handbook of Transition Metal Polymerization Catalysts. , Max P. McDaniel. s.l. : John Wiley & Sons, Inc., 2010, págs. 291-446.
12. Oriented structure and anisotropy properties of polymer blown films: HDPE, LLDPE and LDPE. X.M. Zhang, S. Elkoun, A. Ajji, M.A. Huneault. 2004, Polymer, Vol. 45, págs. 217-229.
13. Elongational Rheology of LLDPE / LDPE Blends. A. Ajji, P. Sammut, M. A.
Huneault. 2002, Journal of Applied Polymer Science, Vol. 88, págs. 3070-3077.
14. Analysis of photo-chemical degradation behaviour of polyethylene mulching film with pro-oxidants. I. Kyrikou, D. Briassoulis, M. Hiskakis, E. Babou. 2011, Polymer Degradation and Stability, Vol. 96, págs. 2237-2252.
15. Bell Pepper Plant Development over Mulches of Diverse Colors. D. Decoteau, M.
Kasperbauer, P. Hunt. 1990, HortScience, Vol. 25, págs. 460-462.
16. Plastic Mulches for the Production of Vegetable Crops. W. J. Lament Jr. 1993, HortTechnology, Vol. 3, págs. 35-39.
17. Effect of mulching with film of different colours made from original and recycled polyethylene on the yield of butterhead lettuce and celery. P. Siwek, A. Kalisz, R.
Wojciechowska. 2007, Folia Horticulturae, Vol. 19, págs. 25-35.
18. Uses of 2-hydroxypropyl-3-piperazinyl-quinoline carboxylic acid methacrylate and Terbutryn as algaecides in low-density polyethylene mulching films for agricultural applications. A. Gitchaiwat, S. Likhitlert, A. Kositchaiyong, K. Israngkura, K.
Taptim, N. Sombatsompop. 2016, Journal of Plastic Film & Sheeting, Vol. 32, págs.
97–116.
~ 100 ~
19. Degradation of Polyethylene Mulching Film under Different Environmental Conditions. X. Zhang, J. Wang, B. Sui, Z. Wen, D. Li, Z. Liu. 2016, Journal of the Chemical Society of Pakistan, Vol. 38, págs. 996-1004.
20. Photostability of HDPE Filaments Stabilized with UV Absorbers (UVA) and Light Stabilizers (HALS). B. S. Butola, M. Joshi. 2013, Journal of Engineered Fibers and Fabrics, Vol. 8, págs. 61-68.
21. Comparative study of the photochemical stability of HDPE/Ag composites. I.
Grigoriadou, E. Pavlidou, K. Paraskevopoulos, Z. Terzopoulou, D. Bikiaris. 2018, Polymer Degradation and Stability, Vol. 153, págs. 23-36.
22. Schmid et al. Nanotechnology: Assessment and Perspectives. s.l. : Springer, 2006.
págs. 11-16.
23. Investigating the Effect of Various Nanomaterials on the Wettability of Sandstone Reservoir. E. Moustafa, A. Noah, K. Beshay, L. Sultan, M. Essam, O. Nouh. 2015, World Journal of Engineering and Technology, Vol. 3, págs. 116-126.
24. Polymer nanotechnology: Nanocomposites. D. Paul, L. Robeson. 2008, Polymer, Vol. 49, págs. 3187-3204.
25. Enhancement in thermal and mechanical properties of polyurethane foam infused with nanoparticles. M.C. Saha, Md.E. Kabir, S. Jeelani. 2008, Materials Science and Engineering, Vol. 479, págs. 213-222.
26. Nanotechnology in agriculture: prospects and constraints. S. Mukhopadhyay. 2014, Nanotechnology, Science and Applications, Vol. 7, págs. 63-71.
27. High-Frequency Electric Field Induced Nonlinear Electron Transport in Chiral Carbon Nanotubes. S. S. Abukari, S. Y. Mensah et al. 2015, World Journal of Condensed Matter Physics, Vol. 5, págs. 294-300.
28. Effect of carbon nanotubes on the photo-oxidative durability of syndiotactic polypropylene. L. Guadagno, C. Naddeo, M. Raimondo, G. Gorrasi,. 2010, Polymer Degradation and Stability, Vol. 95, págs. 1614-1626.
~ 101 ~
29. C. P. Poole y F.J. Owens. Introducction to nanotechnology. s.l. : John Wiley & sons, 2003. pág. 115.
30. Synthesis and characterization of graphene and carbon nanotubes: A review on the past and recent developments. W.W. Liu, S.P. Chai, A. Mohamed, U. Hashim. 2014, Journal of Industrial and Engineering Chemistry, Vol. 20, págs. 1171-1185.
31. Synthesis of Carbon Nanotubes. K. Awasthi, A. Srivastava, O.N. Srivastava. 2005, Journal of nanoscience and nanotechnology, Vol. 5, págs. 1616-1636.
32. Influence of Carbon Nanotubes on Epoxy Resin Cure Reaction Using Different Techniques: A Comprehensive Review. L.S. Cividanes, E. Simonetti, M.B. Moraes, F.W. Fernandes, G.P. Thim. 2014, Polymer Engineering and Science, Vol. 54, págs.
2461-2469.
33. M. C. Weisenberger, R. Andrews, and T. Rantell. Carbon Nanotube Polymer Composites: Recent Developments in Mechanical. [aut. libro] James E. Mark. Physical Properties of Polymers Handbook. s.l. : Springer, 2007, págs. 585-598.
34. Photo-oxidation behaviour of polyethylene/multi-wall carbon nanotube composite films. N.Tz. Dintcheva, F.P. La Mantia, V. Malatesta. 2009, Polymer Degradation and Stability , Vol. 94, págs. 162-170.
35. In Situ Monitoring of Dispersion Dynamics of Carbon Nanotubes during Sonication Using Electrical Conductivity Measurements. S. S. Ali, M. Shahabuddin, M. Asif. 2015, Journal of Nanomaterials, Vol. 2015, págs. 1-8.
36. Graphene based materials: Past, present and future. V. Singh, D. Joung, L. Zhai, S.
Das, S. I. Khondaker, S. Seal. 2011, Progress in Materials Science, Vol. 56, págs. 1178- 1271.
37. Graphene: synthesis and applications. P. Avouris, C. Dimitrakopoulos. 2012, Materials Today, Vol. 15, págs. 86-97.
38. Numerical investigation of elastic mechanical properties of graphene structures. S.K.
Georgantzinos, G.I. Giannopoulos, N.K. Anifantis. 2010, Materials and Design, Vol.
31, págs. 4646-4654.
~ 102 ~
39. Electric Field Effect in Atomically Thin Carbon Films. K. Novoselov, A. Geim, S.
Morozov, D. Jiang, Y. Zhang, S. Dubonos, I. Grigorieva, A. Firsov. 2004, Science, Vol. 306, págs. 666-669.
40. Planer Nano- Graphenes from Camphor by CVD. P. R. Somani, S. P. Somani, M.
Umeno. 2006, Chemical Physics Letters, Vol. 430, págs. 56-59.
41. Melt processing and properties of linear low density polyethylene-graphene nanoplatelet composites. P. Khanam, M.A. AlMaadeed, M. Ouederni, E. Harkin- Jones, B. Mayoral, A. Hamilton, D. Sun. 2016, Vacuum , Vol. 130, págs. 63-71.
42. A review on synthesis and properties of polymer functionalized graphene. Rama K.
Layek, Arun K. Nandi. 2013, Polymer, Vol. 54, págs. 5087-5103.
43. J.B. Donnet, R. Bansal, M. Wang. Carbon Black. [aut. libro] Roop Chand Bansal, Meng-Jiao Wang Jean-Baptiste Donnet. Carbon Black. s.l. : Marcel Dekker, INC., 1993, págs. 1-57.
44. Evaluation of carbon black properties influencing the ultraviolet protection of LDPE films. C. Maus, D. J. Callahan. 2005, Anais do 8° Congresso Brasileiro de Polímeros, págs. 64-65.
45. Interactions between carbon black and stabilisers in LDPE thermal oxidation. J.M.
Peña, N.S. Allen, M. Edge, C.M. Liauw, B. Valange. 2001, Polymer Degradation and Stability, Vol. 72, págs. 163-174.
46. Ultrasonic twin screw compounding of polypropylene with carbon nanotubes, graphene nanoplates and carbon black. J. Zhong, A. Isayev, X. Zhang. 2016, European Polymer Journal, Vol. 80, págs. 16-39.
47. The effect of van der Waals-based interface cohesive law on carbon nanotube- reinforced composite materials. H. Tan, L. Y. Jiang, Y. Huang, B. Liu, K. C. Hwang.
2007, Composites Science and Technology, Vol. 67, págs. 2941 - 2946.
48. Effect of functionalized graphene on the physical properties of linear low density polyethylene nanocomposites. T. Kuila, S. Bose, A. K. Mishra, P. Khanra, N. H. Kim, J. H. Lee. 2012, Polymer Testing, Vol. 31, págs. 31-38.
~ 103 ~
49. Graphene/polyethylene nanocomposites: Effect of polyethylene functionalization and blending methods. H. Kim, S. Kobayashi, M. A. AbdurRahim, M. J. Zhang, A.
Khusainova. 2011, Polymer, Vol. 52, págs. 1837-1846.
50. Applications of ultrasound to materials chemistry. K.S. Suslick, G.J. Price. 1999, Materials Science, Vol. 29, págs. 295-326.
51. Effect of reaction conditions on size and morphology of ultrasonically prepared Ni(OH)2 powders. S. Cabanas-Polo, K.S. Suslick, A.J. Sanchez-Herencia. 2011, Ultrasonics Sonochemistry, Vol. 18, págs. 901-906.
52. Effects of Ultrasonic Oscillations on Rheological Behavior and Mechanical Properties of Novel Propylene-Based Plastomers. B. Peng, H. Wu, S. Guo, S. Lai, J.
Jow. 2007, Journal of Applied Polymer Science, Vol. 106, págs. 1725-1732.
53. Mechanism for Effect of Ultrasound on Polymer Melt in Extrusion. Y. Chen, H. Li.
2007, Journal of Polymer Science, Vol. 45, págs. 1226-1233.
54. Sonofragmentation of Ionic Crystals. H. Kim, K. Suslick. 2017, Chemestry European Journal, Vol. 23, págs. 2778-2782.
55. Ultrasound assisted twin screw extrusion of polymer–nanocomposites containing carbon nanotubes. A.I. Isayev, R. Kumar, T. M. Lewis. 2009, Polymer, Vol. 50, págs.
250-260.
56. Ultrasonic treatment of polycarbonate/carbon nanotubes composites. X. Gao, A. I.
Isayev, C. Yi. 2016, Polymer, Vol. 84, págs. 209-222.
57. Ultrasonically assisted compounding of CNT with polypropylenes of different molecular weights. J. Zhong, A. Isayev. 2016, Polymer, Vol. 107, págs. 130-146.
58. Prediction of useful life of greenhouse films with artificial ageing equipment. E.
Ramírez V., J.G. Martínez C., S. Sánchez, C.L. Balderas. 1995, Plasticulture, Vol.
105, págs. 5-12.
~ 104 ~
59. Polyolefin Nanocomposites with Enhanced Photostability Weathering Effect on Morphology and Mechanical Properties. B. P. Panda, S. Mohanty, S. K. Nayak. 2014, Journal of Materials Engineering and Performance, Vol. 23, págs. 3229-3244.
60. Durability of mono-layer versus tri-layers LDPE films used as greenhouse cover:
Comparative study. A. Dehbi, A.H. Mourad. s.l. : Arabian Journal of Chemistry, 2011, Vol. 9, págs. S282-S289.
61. Photodegradation and photostabilization of polymers, especially polystyrene: review.
E. Yousif, R. Haddad. 2013, SpringerPlus, Vol. 2, págs. 1-32.
62. An overview on the degradability of polymer nanocomposites. J. Pandey, K. Reddy, A. Kumar, R.P. Singh. 2005, Polymer Degradation and Stability, Vol. 88, págs. 234- 250.
63. Polyethylene Degradation and Degradation Products. A. C. Albertsson, S.
Karlsson. 1990, Agricultural and Synthetic Polymers, Vols. ACS Symposium Series, Vol. 433, págs. 60-64.
64. Degradation and Stabilization of Low-density Polyethylene Films used as Greenhouse Covering Materials. P. A. Dilara, D. Briassoulis. 2000, Journal of Agricultural Engineering Research, Vol. 76, págs. 309-321.
65. Photo- and thermal-oxidation of polyethylene: Comparison of mechanisms and influence of unsaturation content. M. Gardette, A. Perthue, J.L. Gardette, E. Földes, B. Pukánszky, S. Therias. 2013, Polymer Degradation and Stability, Vol. 98, págs.
2383-2390.
66. Evaluation of HDPE and LDPE degradation by fungus, implemented by statistical optimization. N. Ojha, N. Pradhan, S. Singh, A. Barla, A. Shrivastava, P. Khatua, V.
Rai, S. Bose. 2017, Scientific Reports, Vol. 7, págs. 39515 (1-13).
67. Influence of ultrasonic treatment in PP/CNT composites using masterbatch dilution method. Jing Zhong, Avraam I. Isayev, Keyuan Huang. 2014, Polymer, Vol. 55, págs.
1745-1755.
~ 105 ~
68. H.F. Giles Jr. Extrusion: The Definitive Processing Guide and Handbook. s.l. : William Andrew Publishing, 2005. págs. 425, 454.
69. Correlations Between Processing Parameters, Morphology, and Properties of Blown Films of Linear Low-Density Polyethylene/Low-Density Polyethylene Blends. I.
Crystalline Biaxial Orientation by IR and Mechanical Properties. M. C. Branciforti, R.
Pimentel, A. Bernardi, R. E. S. Bretas. 2006, Journal of Applied Polymer Science, Vol.
101, págs. 3161-3167.
70. Morphology and Mechanical Properties of Blown Films of a Low-Density Polyethylene/Linear Low-Density Polyethylene Blend. J. Lu, H. Sue. 2002, Journal of Polymer Science: Part B: Polymer Physics, Vol. 40, págs. 507–518.
71. Low density polyethylene–montmorillonite nanocomposites for film blowing. J.
Golebiewski, A. Rozanski, J. Dzwonkowski, A. Galeski. 2008, European Polymer Journal, Vol. 44, págs. 270-286.
72. Q-lab Corporation. QUV y Q-SUN Una comparación de dos aproximaciones eficaces para intemperismo acelerado y pruebas de estabilidad de luz. s.l. : Q-lab Corporation, 2014.
73. L. Draghi. Static and uniaxial characterization of polymer biomaterials. [aut. libro]
Maria Tanzi y Silvia Faré. Characterization of Polymeric Biomaterials. s.l. : Woodhead Publising, 2017, pág. 178.
74. Investigating the effect of accelerated weathering on the mechanical and physical properties of high content plastic solid waste (PSW) blends with virgin linear low density polyethylene (LLDPE). S.M. Al-Salem, G. Abraham, O.A. Al-Qabandi, A.M. Dashti.
2015, Polymer Testing, Vol. 46, págs. 116-121.
75. Optical properties of LDPE films with different additives mixtures. A. E. Delgado, W.Aperador, J. H. Bautista Ruíz. 2011, Ingenier´ıa y Ciencia, Vol. 7, págs. 49-70.
76. Microstructure and Properties of Polypropylene/Carbon Nanotube Nanocomposites.
D. Bikiaris. 2010, Materials, Vol. 3, págs. 2884-2946.
~ 106 ~
77. LDPE/EVA/graphene nanocomposites with enhanced mechanical and gas permeability properties. M. Tayebia, A. Ramazani, M. T. Hamed, A. Tayyebi. 2015, Polymers for Advanced Technologies, Vol. 26, págs. 1083-1090.
78. LDPE/Carbon Black Conductive Composites: Influence of Radiation Crosslinking on PTC and NTC Properties. H. Xie, P. Deng, L. Dong, J. Sun. 2002, Journal of Applied Polymer Science, Vol. 85, págs. 2742–2749.
79. Potential contact and intraocular lenses based on hydrophilic/hydrophobic sulfonated syndiotactic polystyrene membranes. S. Zuppolini, A. Borriello, M.
Pellegrino, V. Venditto, L. Ambrosio, L. Nicolais. 2017, Journal of King Saud University – Science, Vol. 29, págs. 487-493.
80. Photocatalytic degradation of low density polyethylene (LDPE) films using titania nanotubes. S.S. Ali, I.A. Qazi, M. Arshad, Z. Khan, T. C. Voice, Ch. T. Mehmood.
2016, Environmental Nanotechnology, Monitoring & Management , Vol. 5, págs. 44-53.
81. Determination of the Concentration of Single-Walled Carbon Nanotubes in Aqueous Dispersions Using UV-Visible Absorption Spectroscopy. S. Attal, R.
Thiruvengadathan, O. Regev. 2006, Analytical Chemistry, Vol. 78, págs. 8098-8104.
82. UV–vis absorption spectroscopy of carbon nanotubes: Relationship between the p- electron plasmon and nanotube diameter. G. Rance, D. Marsh, R. Nicholas, A.
Khlobystov. 2010, Chemical Physics Letters, Vol. 493, págs. 19-23.
83. Investigation of Graphene/Ag Nanocomposites Synthesis Parameters for Two Different Synthesis Methods. Z. Çiplak, N. Yildiz, A. Çalimli. 2014, Fullerenes, Nanotubes and Carbon Nanostructures, Vol. 23, págs. 361-370.
84. LDPE/RH/MAPE/MMT Nanocomposite Films for Packaging Applications. K.
Majeed, R. Arjmandi, A. Hassan. 2018, Bionanocomposites for Packaging Applications, págs. 209-225.
85. Plasticized poly(vinyl chloride) composites: Influence of different nanofillers as antimigration agents. A. Gholami, M. Hajian, F. Rafiemanzelat, A. R. Zanjanijam.
2015, Journal of Applied Polymer Science, Vol. 132, pág. 42559.
~ 107 ~
86. Effect of acid treated carbon nanotubes on mechanical, rheological and thermal properties of polystyrene nanocomposites. T.A. Issam, A. Adnan, T. Selvin, A.
Mamdouh, G. Salihu, S. Rachid, A. Muataz. 2011, Composites, Vol. 42, págs. 1554- 1561.
87. Extrusion of Ultrahigh Molecular Weight Polyethylene Under Ultrasonic Vibration Field. G. Liu, H. Li. 2003, Journal of Applied Polymer Science, Vol. 89, págs. 2628 - 2632.
88. Ultrasound-Assist Extrusion Methods for the Fabrication of Polymer Nanocomposites Based on Polypropylene/Multi-Wall Carbon Nanotubes. C. Ávila-Orta, Z. Quiñones- Jurado, M. Waldo-Mendoza, E. Rivera-Paz, V. Cruz-Delgado, J. Mata-Padilla, P.
González-Morones, R. F. Ziolo. 2015, Materials, Vol. 8, págs. 7900-7912;.
89. Artificial ageing of tri-layer polyethylene film used as greenhouse cover under the effect of the temperature and the UV-A simultaneously. A. Dehbi, A. Bouaza, A. Hamou, B. Youssef, J.M. Saiter. s.l. : Materials and design, 2010, Vol. 31.
90. Ageing Effect on the Properties of Tri-Layer Polyethylene Film Used as Greenhouse Roof. A. Dehbia, A.H. I. Mourad, A. Bouaza. 2011, Procedia Engineering, Vol. 10, págs. 466-471.
91. R.M. Silverstein, F.X. Webster, D.J. Kiemle. Spectrometric identification of organic compound. s.l. : John Wliey & Sons, Inc., 2012.
92. Effects of photo-oxidation on tensile deformation behaviour in low-density polyethylene. E. Miyagawa, K. Nitta, A. Tanaka. 2005, e-Polymers, Vol. 5, págs. 22 (1- 10).
93. Photo-oxidative Degradation of Polyethylene: Effect of Polymer Characteristics on Chemical Changes and Mechanical Properties. Part 1 Quenched Polyethylene . R.
Geetha, A. Torikai, S. Nagaya & K. Fueki. 1987, Polymer Degradation and Stability, Vol. 19, págs. 279-292.
~ 108 ~
94. Natural Weathering, Artificial Photo-Oxidation, and Thermal Aging of Low Density Polyethylene: Grafting of Acrylic Acid onto Aged Polyethylene Films. El-Awady. 2003, Journal of Applied Polymer Science, Vol. 87, págs. 2365-2371.
95. Effect of ultraviolet radiation in the photo-oxidation of High Density Polyethylene and Biodegradable Polyethylene films. Martínez-Romo, González Mota, Soto Bernal, Frausto Reyes,Rosales Candelas. 2015, Journal of Physics: Conference Series, Vol.
582, págs. Number 1 (1-5).
96. Chemical and morphological changes of environmentally degradable polyethylene films exposed to thermo-oxidation. F. Khabbaz, A.C. Albertsson, S. Karlsson. 1999, Polymer Degradation and Stability, Vol. 63, págs. 127-138.
97. Mechanistic implications of plastic degradation. B. Singh, N. Sharma. 2008, Polymer Degradation and Stability, Vol. 93, págs. 561-584.
98. J. F. Rabek. Polymer Photodegradation: Mechanisms and Experimental Methods.
s.l. : Chapman and Hall, 1995. págs. 73-83.
99. Effect of different nanoparticles on HDPE UV stability. I. Grigoriadou, K.M.
Paraskevopoulos, K. Chrissafis, E. Pavlidou, T.-G. Stamkopoulos, D. Bikiaris. 2011, Polymer Degradation and Stability, Vol. 96, págs. 151-163.
100. Nucleation efficiency of fillers in polymer crystallization studied by fast scanning calorimetry: Carbon nanotubes in polypropylene. J. Schawe, P. Potschke, I. Alig. 2017, Polymer, Vol. 116, págs. 160-172.
101. Nucleation Ability of Multiwall Carbon Nanotubes in Polypropylene Composites. E.
Assouline, A. Lustiger, A. H. Barber, C. A. Cooper, E. Klein, E. Wachtel, H. D.
Wagner. 2003, Journal of Polymer Science: Part B: Polymer Physics, Vol. 41, págs. 520- 527.
102. Degradation of Thermomechanical Performance and Lifetime Estimation of Multilayer Greenhouse Polyethylene Films Under Simulated Climatic Conditions. A.
Dehbi, A. I. Mourad, K. Djakhdane, A. Hilal-Alnaqbi. 2014, Polymer Engineering and Science, Vol. 55, págs. 287-298.
~ 109 ~
103. Correlations Between Processing Parameters, Morphology, and Properties of Blown Films of LLDPE/LDPE Blends, Part 2: Crystalline and Amorphous Biaxial Orientation by WAXD Pole Figures. M. Branciforti, L. Guerrini, R. Machado, R.
Bretas. 2006, Journal of Applied Polymer Science, Vol. 102, págs. 2760-2767.
104. Effect of crystallinity on the mechanical properties of starch/synthetic polymer blends. D. H. S. Ramkumar, M. Bhattacharya. 1997, Journal of Materials Science, Vol.
32, págs. 2565 - 2572.
105. The role of chain scission and chain branching in high density polyethylene during thermo-mechanical degradation. L.A. Pinheiro, M.A. Chinelatto, S.V. Canevarolo.
2004, Polymer Degradation and Stability, Vol. 86, págs. 445-453.
106. High-energy radiation forming chain scission and branching in polypropylene. H.
Otaguro, L.F.C.P. de Lima, D.F. Parra, A.B. Lugao , M.A. Chinelatto, S.V.
Canevarolo. 2010, Radiation Physics and Chemistry, Vol. 79, págs. 318-324.
107. Chain scission distribution function for polypropylene degradation during multiple extrusions. Sebastiao V. Canevarolo. 2000, Polymer Degradation and Stability, Vol.
709, págs. 71-76.
108. Evaluation of Philips and ZieglereNatta high-density polyethylene degradation during processing in an internal mixer using the chain scission and branching distribution function analysis. L.A. Pinheiro, M.A. Chinelatto, S.V. Canevarolo. 2006, Polymer Degradation and Stability, Vol. 91, págs. 2324-2332.
~ 110 ~
Anexo I. Diagramas de esfuerzo-deformación y análisis FTIR de películas