The manufacturer accepts no liability for damage resulting from non-observance of the safety instructions. Do not expose the device to excessive heat caused by placing it on a heating device or in direct sunlight. The device supports microSD memory cards up to 32 GB in capacity (optimized for class 6 or higher).
The memory card must always be formatted in the device to ensure that the format is correct. Formatting the memory card with a computer can lead to eventual errors when reading or writing data. Set the volume to a moderate level and do not use headphones to listen for excessively long periods of time.
Be extra careful not to adjust the volume to a level that your hearing cannot handle. Don't turn up the volume so high that you can't hear what's going on around you. The manufacturer guarantees compliance with the maximum sound power of its audio players as determined by the relevant regulatory authorities, but only with the original model of the supplied headphones.
The use of the device's recording function is subject to the legal restrictions that may apply in your country.
Keys
Start-up screen
Menu overview
Charging the battery
Power on/off
Initial installation process
Language selection
Set date & time
Enabling/disabling the keypad lock
Inserting a microSD card
4 To remove the card, press down on the memory card until the release mechanism unlocks and the card is ejected. To ensure that the device saves recordings to the memory card, you must switch from the internal memory to the microSD memory card (see also chapter 9.1.1 Setting the file location, page 27). The display shows a folder icon showing where the recordings are currently stored: u, v, w, x, y – internal memory card.
Accessories
How to connect headphones
Connecting an external microphone Note
Connecting to a computer
Transferring files from or to the device
You can use File Explorer to access device data without installing additional software. X The device automatically appears as a mass storage device, similar to a memory stick or USB card. 3 Copy or move files to your computer or delete files to archive recordings and free up space on your device.
Do not disconnect the device from the computer while files are being transferred to or from the device (LED status indicator flashes yellow when data is being transferred). If you want to delete all data, use the Format memory function (see also chapter 10.1.2 Format memory, page 35). The device supports music files in WMA and MP3 formats, which you can download from your computer to the device's Music folder.
Disconnecting from a computer
The device offers many features that you can use while recording or to improve the quality of a recording.
Creating a recording
Recording using an external microphone
If you connect an external microphone to the device, the recording source will automatically switch and the device's microphone will be muted.
Starting recording automatically
Use Timer function
Use voice activation
Selecting a recording
Playback a recording or music file 1 Select the required file as described
Adjusting playback speed
Quick search
Repeat a file / repeat a sequence
Protecting a recording / lock file
Unprotect / unlock file 1 Select the required file as described
Deleting recordings on the device
Deleting all recordings in the folder
You can delete a single recording on the device or all recordings in a folder.
Radio mode
Saving a radio station pre-set
Saving radio stations automatically
Saving a radio station manually
Deleting a pre-set radio station
Recording from FM radio
Press the j key at the end of the operation to return to the stop mode. Press the j key during an operation to cancel the operation without saving and return to stop mode.
Recording settings
- Set file location
- Setting recording quality
- Setting microphone sensitivity
- Enabling noise reduction
- Setting the timer
- Enabling/disabling voice-activated recording
- Setting auto divide
- Enabling/disabling the record indicator This function allows you to switch off the status LED
Press and hold the menu key for at least two seconds while the device is stopped (home screen) to open the Settings menu. Press the j key to cancel the action without saving and return to stop mode. When shooting in environments with a lot of background (for example, while in a crowd or during a train or car ride), you can activate the noise reduction function to reduce the background noise.
23 Press + / – to select whether the device should record from the internal microphone or an external source. When you stop talking, the device will automatically stop recording after three seconds of silence and only resume when you start talking again. Use the voice activation level to set the volume at which the device should start recording.
When the set time is reached, the device stops the current recording and automatically starts a new one. Press the j key to cancel the operation without saving and return to stop mode.
Display settings
Select language
Adjusting the display contrast
Enabling/disabling the background light
Device settings
Set date & time
AUTO-OFF
Enabling/disabling key and signal tones
Service functions
Display device information
Memory formatting Caution
Device reset
Troubleshooting
Technical data
The information in this user guide has been prepared to the best of our knowledge. (Especially technical data) may be changed or updated at any time without prior notice. Speech Processing Solutions GmbH hereby declares that the DVT2050 device is fully compliant with the essential requirements and other relevant provisions of Directives 2006/95/EC, 2004/108/EC and 2009/125/EC.
This product is made of high quality materials and components that can be reused and recycled. Comply with the applicable legal regulations and only dispose of these products at official collection points. Correct disposal of the device helps to avoid potential negative impacts on the environment and health.
Product: The crossed out dustbin symbol on your product indicates that special waste rules must apply to the electrical and electronic equipment contained within it. Your dealer will take care of the old equipment when you buy a new unit from them. Neither Speech Processing Solutions GmbH nor its affiliates shall be liable to the purchaser of this product or third parties for any claims, losses, costs or expenses incurred by the purchaser or third parties as a result of an accident, misuse or abuse of this product or unauthorized changes, repair, modification of the product or failure to comply with the operating and maintenance instructions provided by Philips.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips Electronics NV and are used by Speech Processing Solutions under license from Koninklijke Philips Electronics NV.
